Photoelectric beam sensor
Model: CVC-FST05
Features
1.REFLECTOR BEAM FOR SHORT DISTANCE PROTECTION
The CVC-FST05 is designed for applications where a "beam break" sensoris desirable but running wire to both ends is imporactical.Suggestedapplications include entrances and exits, corridors,staircases and as anannunciation device.
2.COMPACT SIZE AND SMART DESIGN
Super slim,pocket calculator sized unit is designed for unobtrusive installation.
Its new white enclosure blends well with virtually all environments.
3.EXCELLENT EXTERNALLIGHT IMMUNITY
Our original design has been further enhanced by the addition of a newspecial filter which effectively eliminates interference from visiblelight rays
4. EASY INSTALLATION
The reflector allows upto 30°(+/-15°) angle varience in beam reception/reflection which makesinstallation very "forgiving" and can aid in situations where it isnearly impossible for the beam to reflect off the mirror "dead center".
(1).simple terminal arrangement provides for easy installation.
(2).Wide range of supply voltage,10.5V to 26V DC(non-polarity)
(3).Flush mount plates available for both sensor and reflector (option),BP-5B,BP-5D,BP-5C
(4)."L"brackets available for both sensor and reflector(option),BL-5
Protection distance | 16"(5m) |
Infrared beam | LED |
| Wave length :9400 A Modulation:500Hz |
Response time | 50-100 msec. or more |
Alarm signal | Dry contact relay output 1C |
| Interruption time+Delay time (approx.1 sec.) |
| Contact capacity:30V (AC/DC)0.5A |
Supply voltage | 10.5V to 26VDC (non-polarity) |
Power consumption | 37mA(at 12V DC) |
Ambient temperature range | -4°to +122°F(-20℃ to +50℃) |
Mounting position | Indoor (wall/pillar) |
Wiring | Terminals |
Weight | Sensor -3.15 oz(90g),Reflector -1.75 oz (50g) |
Appearance | ABS resin(white) |