DIN6921 Carbon Hex Flange Bolt

1.0~500.0 USD

Min. Order:	10 Set/Sets
Trade Term:	CIF
Payment Terms:	L/C, T/T
Supply Ability:	4000 Metric Ton/Metric Tons per Month
Place of Origin:	Hebei

Company Profile

Hebei Gee Pipe Mill Co.,Ltd.

Location:	Cangzhou, Hebei, China (Mainland)
Business Type:	Manufacturer, Trading Company
Main Products:	ANSI Forged Stainless Socket Welding Flange, ANSI Forged Stainless Threaded Flange, ANSI Forged Stainless Steel Blind Flange, Concentrice Redueer Sch 5s BW ASTM A 403 WP304 MSS SP43, ANSI Forged Stainlessplate Flange

Product Detail

Model No.:	DN50-DN2400
Means of Transport:	Ocean, Land
Head Code:	Hexagon
Shape:	Equal
Technics:	Forged
Type:	Sight Glass
Material:	Zinc
Connection:	Male
Brand Name:	GEEPIPE
Certification: ISO9001:2008:	Model Number: din931,din933,din603,din912
Production Capacity:	4000 Metric Ton/Metric Tons per Month
Packing:	25kgs/carton,then 36cartons/pallet,or small boxes packing
Delivery Date:	within 20 days after we receive clents' order

Show

Product Description

Hex bolt,flange bolt,bolt standard also available in IFIC-28 and also available in stainless and brass.

DIN6921 Carbon Hex Flange Bolt:

1,Over 15years manufacturer and export experience;

2,Cooperate with first class big importers in America and Europeancountries;

3,Wide variety of materials to include: low carbon, high tensile andalloy;

4,Working process include: cold forged, hot forged, and machining, also CNCmachine, can do OEM order;

5, full sizes available to include metric, and imperial, extra long and extrashort sizes.

6, ISO management.

7, Also available in IFI C-28 and also available in stainless and brass.

Flange Bolt-Up - Bolting Torque Tables

The torque tables are built on specific assumptions regarding bolt and nut factor. Before using a given torque table, these assumptions should be verified to insure they are appropriate for the specific application.

Even if all assumptions are appropriate, results may vary depending on actual conditions. Many factors induce scatter in the results or increase the inherent variability in the bolting process. These include variations in the nut factor; bolt, flange and nut condition; equipment calibration and condition; perpendicularity of the bolt, nut and flange; etc.

The values in the tables are based on the equation:

S=	Fkd
	12

Where:
T = Torque value, (ft-lbs)
F = Bolt pre-load, (lbs)
k = Nut Factor based on lubricant used
d = Nominal bolt diameter, (in.)

The nut factor is not the coefficient of friction.
It is an experimentally derived constant that includes the impact of friction.

Table 1 - ASTM A193 & ASTM A320 Grade B8, CL2 Stud Bolts
Bolt Dia	Torgue FT-LBS			Torque Nm
Bolt Dia	30% Initial Torgue	70% Torque	100% Final Torque	30% Initial Torgue	70% Torque	100% Final Torque
1/2	16	36	52	22	49	71
9/16	23	53	75	31	72	102
5/8	31	73	104	42	99	141
3/4	55	129	184	75	175	249
7/8	71	166	237	96	225	321
1	107	249	356	145	338	483
1-1/8	127	297	424	172	403	575
1-1/4	179	417	596	243	565	808
1-3/8	186	435	622	252	590	843
1-1/2	246	574	821	334	778	1113
1-9/16	168	392	560	228	531	759
1-5/8	191	445	636	259	603	862
1-3/4	240	561	801	325	761	1086
1-7/8	298	696	994	404	944	1348
2	366	853	1219	496	1157	1653
2-1/4	529	1234	1762	717	1673	2389
2-1/2	733	1709	2442	994	2317	3311
2-3/4	986	2300	3285	1337	3118	4454
3	1289	3008	4297	1748	4078	5826
Bolting torque to develop 50% Bolt Yield Stress at Nut Factor, K=0.16

NOTES:

This Table is applicable to Never-Seize paste and Fel-Pro lubricant, K=0.16.
The above Table is applicable only for ASTM A320 Grade B8, Class 2 and A193 Grade B8, Class 2 Stud Bolts. These are 304 SS material.
The torque values are approved for spiral wound graphite and PTFE filled gaskets, graphite sheet gaskets GHE and GHR types, ring joint, double jacketed and Kammprofile gaskets.
The Final Torque Value accounts for 10% bolt relaxation.
The yield strength for strain-hardened bolts varies with diameter. Torque values for bolts greater than 1 1/2 in. diameter are based on 30 ksi yield strength.

Table 1A - Cold Service ASTM A193 & ASTM A320 Grade B8, CL2 Stud Bolts
Bolt Dia	Torgue FT-LBS			Torque Nm
Bolt Dia	30% Initial Torgue	70% Torque	100% Final Torque	30% Initial Torgue	70% Torque	100% Final Torque
1/2	22	51	73	30	69	99
9/16	32	74	105	43	100	142
5/8	44	102	145	60	138	197
3/4	77	180	257	104	244	348
7/8	100	232	332	136	315	450
1	149	348	498	202	472	675
1-1/8	178	415	593	241	563	804
1-1/4	250	584	834	339	792	1131
1-3/8	261	609	870	354	826	1180
1-1/2	345	804	1149	468	1090	1558
1-9/16	235	549	784	319	744	1063
1-5/8	267	624	891	362	846	1208
1-3/4	336	785	1121	456	1064	1520
1-7/8	418	974	1392	567	1321	1887
2	512	1194	1706	694	1619	2313
2-1/4	740	1727	2467	1003	2341	3345
2-1/2	1026	2393	3419	1391	3244	4636
2-3/4	1380	3219	4599	1871	4364	6235
3	1805	4211	6015	2447	5709	8155
Bolting torque to develop 70% Bolt Yield Stress at Nut Factor, K=0.16

NOTES:

This Table is applicable to Never-Seize paste and Fel-Pro lubricant, K=0.16.
The above Table is applicable only for ASTM A320 Grade B8, Class 2 and A193 Grade B8, Class 2 Stud Bolts. These are 304 SS material.
The torque values are approved for spiral wound graphite and PTFE filled gaskets, graphite sheet gaskets GHE and GHR types, ring joint, double jacketed and Kammprofile gaskets.
The Final Torque Value accounts for 10% bolt relaxation.
The yield strength for strain-hardened bolts varies with diameter. Torque values for bolts greater than 1 1/2 in. diameter are based on 30 ksi yield strength.

Table 2 - ASTM 193 Grade B7 & ASTM 193 Grade B16 Stud Bolts
Bolt Dia	Torgue FT-LBS			Torque Nm
Bolt Dia	30% Initial Torgue	70% Torque	100% Final Torque	30% Initial Torgue	70% Torque	100% Final Torque
1/2	22	51	73	30	69	99
9/16	32	74	105	43	100	142
5/8	44	102	145	60	138	197
3/4	77	180	257	104	244	348
7/8	100	232	332	136	315	450
1	149	348	498	202	472	675
1-1/8	178	415	593	241	563	804
1-1/4	250	584	834	339	792	1131
1-3/8	261	609	870	354	826	1180
1-1/2	345	804	1149	468	1090	1558
1-9/16	235	549	784	319	744	1063
1-5/8	267	624	891	362	846	1208
1-3/4	336	785	1121	456	1064	1520
1-7/8	418	974	1392	567	1321	1887
2	512	1194	1706	694	1619	2313
2-1/4	740	1727	2467	1003	2341	3345
2-1/2	1026	2393	3419	1391	3244	4636
2-3/4	1380	3219	4599	1871	4364	6235
3	1805	4211	6015	2447	5709	8155
Bolting torque to develop 50% Bolt Yield Stress at Nut Factor, K=0.16

NOTES:

This Table is applicable to Never-Seize paste and Fel-Pro lubricant, K=0.16.
The above Table is applicable only for ASTM A320 Grade L7, A193 Grade B7 and A193 Grade B16 Stud Bolts.
The torque values are approved for spiral wound graphite and PTFE filled gaskets, graphite sheet gaskets GHE and GHR types, ring joint, double jacketed and Kammprofile gaskets with graphite and PTFE lining.
The Final Torque Value accounts for 10% bolt relaxation.
This Table is not acceptable for PTFE coated Stud Bolts and nuts, for these refer to Table 5.

Table 2A - Cold Service ASTM A320 Grade L7 Stud Bolts
Bolt Dia	Torgue FT-LBS			Torque Nm
Bolt Dia	30% Initial Torgue	70% Torque	100% Final Torque	30% Initial Torgue	70% Torque	100% Final Torque
1/2	23	54	76	31	73	103
9/16	33	77	110	45	104	149
5/8	46	107	152	62	145	206
3/4	81	189	270	110	256	366
7/8	131	305	436	178	414	591
1	196	457	653	266	620	885
1-1/8	287	671	958	389	910	1299
1-1/4	404	943	1348	548	1279	1828
1-3/8	854	1279	1828	1158	1734	2478
1-1/2	725	1689	2413	983	2290	3272
1-9/16	824	1922	2746	1117	2606	3723
1-5/8	935	2183	3118	1268	2960	4227
1-3/4	1177	2747	3924	1596	3724	5320
1-7/8	1461	3410	4871	1981	4623	6604
2	1792	4180	5972	2430	5667	8097
2-1/4	2590	6044	8635	3512	8195	11707
2-1/2	3590	8376	11966	4867	11356	16224
Bolting torque to develop 70% Bolt Yield Stress at Nut Factor, K=0.16

NOTES:

This Table is applicable to Never-Seize paste and Fel-Pro lubricant, K=0.16.
The above Table is applicable only for ASTM A320 Grade L7.
The torque values are approved for spiral wound graphite and PTFE filled gaskets, graphite sheet gaskets GHE and GHR types, ring joint, double jacketed and Kammprofile gaskets with graphite and PTFE lining.
The Final Torque Value accounts for 10% bolt relaxation.
This Table is not acceptable for PTFE coated Stud Bolts and nuts, for these refer to Table 5A.

Table 3 - Use only with A193 B8, CL1 Bolts at 540°C - 650°C on uninsulated flanges
Bolt Dia	Torgue FT-LBS			Torque Nm
Bolt Dia	30% Initial Torgue	70% Torque	100% Final Torque	30% Initial Torgue	70% Torque	100% Final Torque
1/2	5	10	15	7	14	20
9/16	5	15	20	7	20	27
5/8	10	20	25	14	27	34
3/4	15	35	50	20	47	68
7/8	25	55	80	34	75	108
1	35	90	125	47	122	169
1-1/8	50	125	175	68	169	237
1-1/4	75	175	250	102	237	339
1-3/8	100	235	335	136	319	454
1-1/2	135	315	450	183	427	610
1-9/16	150	350	500	203	475	678
1-5/8	170	400	575	230	542	780
1-3/4	215	505	725	292	685	983
1-7/8	270	630	900	366	854	1220
2	330	770	1100	447	1044	1491
2-1/4	475	1115	1590	644	1512	2156
2-1/2	660	1540	2200	895	2088	2983
2-3/4	885	2065	2950	1200	2800	4000
3	1160	2705	3865	1573	3667	5240
Bolting torque to develop 45% Bolt Yield Stress at Nut Factor, K=0.16

NOTES:

This Table is applicable to Never-Seize paste and Fel-Pro lubricant, K=0.16.
The above Table is applicable only for ASTM A193 Grade B8, Class 1 Stud Bolts for use in temperatures above 1000°F (540°C), and up to and including 1200°F (650°C), installed on uninsulated flanges. The values are based on yield strength at ambient temperature.
The torque values are approved for spiral wound graphite filled gaskets, graphite sheet gaskets GHE and GHR types, ring joint, double jacketed and Kammprofile gaskets with graphite lining.
The Final Torque Value accounts for 10% bolt relaxation.

Table 4 - Use only with 6061-T6 Aluminium flanges
Bolt Dia	Torgue FT-LBS			Torque Nm
Bolt Dia	30% Initial Torgue	70% Torque	100% Final Torque	30% Initial Torgue	70% Torque	100% Final Torque
1/2	10	15	25	14	20	34
9/16	10	25	35	14	34	47
5/8	15	35	50	20	47	68
3/4	25	60	90	34	81	122
7/8	40	100	140	54	136	190
1	65	150	215	88	203	292
1-1/8	95	220	315	129	298	427
1-1/4	130	305	440	176	414	597
1-3/8	175	415	595	237	563	807
1-1/2	230	540	770	312	732	1044
1-9/16	265	620	885	359	841	1200
1-5/8	300	700	1000	407	949	1356
1-3/4	375	875	1250	508	1186	1695
1-7/8	465	1085	1550	630	1471	2102
2	565	1320	1885	766	1790	2556
2-1/4	815	1900	2715	1105	2576	3681
2-1/2	1125	2625	3750	1525	3559	5084
2-3/4	1500	3515	5020	2034	4766	6806
3	1970	4595	6565	2671	6230	8901
Bolting torque to develop 25,000 PSI Bolt Stress at Nut Factor, K=0.16

NOTES:

This Table is applicable to Never-Seize paste and Fel-Pro lubricant, K=0.16.
The above Table is applicable for all Stud Bolts listed in Doc No... Do not use at temperatures exceeding 350°F (175°C).
The torque values are approved for gaskets with a low seating stress such as elastomer gaskets.

Table 5 - PTFE coated ASTM A193 B7 & ASTM 193 B16 Stud Bolts
Bolt Dia	Torgue FT-LBS			Torque Nm
Bolt Dia	30% Initial Torgue	70% Torque	100% Final Torque	30% Initial Torgue	70% Torque	100% Final Torque
1/2	12	29	41	16	39	56
9/16	18	41	59	24	56	80
5/8	24	57	82	33	77	111
3/4	43	101	145	58	137	197
7/8	70	163	233	95	221	316
1	105	245	350	142	332	475
1-1/8	154	359	513	209	487	696
1-1/4	217	505	722	294	685	979
1-3/8	294	685	979	399	929	1327
1-1/2	388	905	1292	526	1227	1752
1-9/16	441	1030	1471	598	1396	1994
1-5/8	501	1169	1670	679	1585	2264
1-3/4	631	1471	2102	856	1994	2850
1-7/8	783	1827	2610	1062	2477	3539
2	960	2240	3199	1302	3037	4337
2-1/4	1388	3238	4626	1882	4390	6272
2-1/2	1923	4487	6410	2607	6084	8691
2-3/4	2341	5462	7802	3174	7405	10578
3	3061	7143	10204	4150	9685	13835
Bolting torque to develop 50% Bolt Yield Stress at Nut Factor, K=0.12

NOTES:

This Table is applicable for PTFE coated bolts with K=0.12.
The above Table is applicable only for A193 Grade B7 and A193 Grade B16 Stud Bolts.
The torque values are approved for spiral wound graphite and PTFE filled gaskets, graphite sheet gaskets GHE and GHR types, ring joint, double jacketed and Kammprofile gaskets with graphite and PTFE lining.
The Final Torque Value accounts for 10% bolt relaxation.