DR-AY30 CO2 Laser Marking Machine

CO2 laser is a gas laser, which produces a wavelength of 10.6μm, belonging to min-infrared band, CO2 lasers are relatively large and higher power conversion efficiency, which is the largest power of a laser.

CO2 laser with CO2 gas as the working substance, the CO2 and other auxiliary gas filled discharge tube, when the electrode voltage discharge generated heightening glow discharge, we can release the gas laser, laser energy will be released after amplification , can be laser processing. Laser power, power is controlled by software, continuously adjustable.

1, a large laser power

2, power is controlled by software, continuously adjustable

3, marking a wider area

4, marked clearly,not easy to wear off, cutting efficiency

5, can control the depth of carving

6, low processing costs, without supplies

A variety of non-metallic materials can be engraved. Applicable to leather, denim, plexiglass, acrylic, wood, epoxy resin, unsaturated resin, such as non-metallic materials are widely used in leather, wood, fabric cutting, textiles, plastics, signage, architectural ceramics, medicine, rubber products, beverage packaging, crafts, gifts, electronic components, communications, watches, glasses, printing, shell plate, decoration and other industries. Marking the graphics are clear and beautiful, without supplies, stable performance. The maintenance-free of overall machine will last 30,000 hours.

Maximum laser power: 30W

Laser wavelength: 10.64μm

Laser repetition frequency: ≤ 50kHz

Standard engraving range: 110mm × 110mm

Engraving depth: ≤ 5mm

Engraving line speed: ≤ 7000mm / s

Minimum line width: 0.1mm

Minimum characters: 0.4mm

Repeat accuracy: ± 0.01mm

Total Power: 0.6KW

The demand for electricity: 220V / single phase / 50Hz / 3A

Contact Supplier