Payment Terms: | T/T, WU |
---|---|
Supply Ability: | 1000 Pieces /Month |
Place of Origin: | Zhejiang |
Location: | Ningbo, Zhejiang, China (Mainland) |
---|---|
Business Type: | Manufacturer, Trading Company |
Means of Transport: | Ocean, Air, Land |
---|---|
Brand Name: | SUPERMECH |
Material: | Steel |
Pressure Kgf/cm2: | 3-7 Kgf/cm2 |
out ort size: | PT3/8 |
Production Capacity: | 1000 Pieces /Month |
Packing: | box |
Delivery Date: | 10-15 days |
PRODUCT NAME: Pneumatic percussion hammer
Product Model:SK
Model | A | B | C | D | E | F | Kgf/cm2 | The air consumption L | impact force N.M | weight |
SK·30 | 9 | 67 | 82 | 135 | 1/4″ | 1/8″ | 3~7 | 0.028 | -2.0K mg/sec | 1.1Kg |
SK·40 | 11 | 77 | 98 | 175 | 1/4″ | 1/8″ | 3~7 | 0.028 | -9.0K mg/sec | 2.1Kg |
SK·60 | 12.5 | 110 | 143 | 220 | 1/4″ | 1/4″ | 3~7 | 0.028 | -18.6K mg/sec | 5.3Kg |
SK·80 | 17 | 140 | 170 | 275 | 3/8″ | 3/8″ | 4~6 | 0.455 | -28.2K mg/sec | 11.2Kg |
SK·100 | 3/8" | 3/8" | 5-7 | 1.012 | -42.0K mg/sec | 35 Kg |
1.Product Description
Pneumatic Percussion Hammer is widely used in material separating, material conveying, hopper exhausting, powder falling
supporting, material tamping and so on. It is an advanced, innovative and unique device of facilitating powder falling. This product
can automatically prevent the adhesion, blocking and bridging during powder conveying in pipeline, hopper and storage bin, thus
reducing the damage and deformation to walls of equipment. This product is extensively applied in chemical, fertilizer, food,
pesticides, medicine, ceramics, glass, cement, fuel and other powder processing industries.
2.Installation and maintenance:
Will strengthen the steel welding in shock, will be subject to screw hole center distance, symmetric.Before welding to work to the wall.For the wall thickness is less than the prefix = st14mm work thin wall, generally positive welding work on 2-3 mm reinforcing plate, and then will have welding stiffener jar on welding in strengthen the wood.Long-term use of jar, in order to ensure production safety, high available rings according to insurance line.Use time more than three months, should be timely and unpick and wash, unpick and wash need to loosen the flange on four partial to listen to the eccentric nut to pull out steel bushing are clean and coated with a small amount of lubricating oil, in order to ensure the normal work in institutions of magnetic piston.Who remove the jar over the flange nut and the repackaging, should adjust locking spring break, usually in the range of 4 to 5 mm is better, in order to ensure the normal work of the jar.
3.Working principle:
Air hammer have internal - strong magnetic magnet, before at the end of the action, magnetic hammer head close to the magnetic substrate.When the 3-way magnet valve (electricity, air inlet pressure is greater than joint magnetic force, magnetic hammer head high speed from the substrate, impact to the bottom.After impact, the 3-way magnet valve (electricity, gas inside the product out, hammer head with the aid of the spring back to the initial position.The impact of the air hammer, passed to the warehouse wall pipe or barrel, enables the material to flow smoothly.
Dear Mr/Ms,
Come to China, Come to SUPERMECH.
We are factory of Pneumatic Cylinder and Pneumatic Fittings, air source treatment(FRL Combination), Solenoid Valve, if you are interested in our company, please contact us freely, We promise to reply email to you in 24 hours.