Single Action Aluminum Mini Pneumatic Cylinder with spring
| Min. Order: | 5 Piece/Pieces |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | T/T, WU |
| Supply Ability: | 10000pcs/month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
Product Detail
| Model No.: | MSAL |
|---|---|
| Means of Transport: | Ocean, Air |
| Brand Name: | SUPERMECH |
| Cap Material: | Aluminium alloy |
| Brand: | SUPERMECH |
| Origin of Place: | Zhejiang, China(Mainland) |
| Piston: | aluminum alloy |
| piston rod: | Steel |
| Production Capacity: | 10000pcs/month |
| Packing: | cartons/pallets |
| Delivery Date: | 20-30days |
Product Description
MSAL Single Action Aluminum Mini Pneumatic Cylinder with spring
Specification
Bore Specification(mm) | 16 | 20 | 25 | 32 | 40 |
Joint Pipe Bore | M5×0.8 | G1/8 | G1/4 | ||
Motion Pattern | Double Action or Single Action | ||||
Working Medium | Air | ||||
Fixed Type | Basic type FA type LB type SDB type | ||||
Working-pressure | Single Action 2.5~9.0Kgf/cm² | ||||
Ensured Pressure Resistance | 13.5Kgf/cm² | ||||
Operating Temperature Range | 0~70°C | ||||
Operating Speed Range | 50~800mm/s | ||||
Buffer Type | Soft land Buffer | ||||
Overall Dimension
1 pneumatic Cylinder using conditions
(1) Pneumatic cylinder using the system pressure, medium temperature should be consistent with the basic parameters of pneumatic cylinder models specified value table.
(2) The compressed air must be clean drive cylinder, less water, this circuit must be used in the gas manifold filter.
In order to lubricate the cylinder internal loop in the pneumatic system lubricator must be used (no oil lubrication cylinder can not)
3 Cylinder Maintenance
(1) cylinder normal use, the system should always check the water separator and lubricator work, and timely drainage refueling. Not oil cylinder 6 months within the cylinder sliding parts greasing.
(2) Binaural using rear single cylinder or intermediate swing cylinder should be regularly put to the axis of the tail or add oil.
(3) Cylinder during normal use various parts of the cylinder should be checked regularly, pay attention to joints loose. Cylinder seals for damage leaks, identify problems and should be repaired to prevent accidents.
(4) cylinder repair, cylinder malfunction may exclude the following table provides methods and handling.