Laser Cutting and Computer Embroidery Machine For Home Textile

-Take this design for example, if the laser bridge is for one phase 20 heads embroidery machine, laser process 15 minutes to finish.

-The original fabric cost USD1.2/meter. After embroidery, the embroidered fabric cost USD1.6/meter. After laser bridge process, it can increase the added-value as USD10/meter for profit.

A. One phase laser bridge for 9.6 meter, 24embroidery heads, 6 needles, 300mm head distance, X=600mm, Y=850mm;

B. Two phases laser bridge for 20 meters, 0.8m working table between two sets machines;

C. The embroidery machine can be flat embroidery machine, sequin device, cording device, coiling device, etc.

A. Laser bridge supplying as whole system, provides embroidery machine and laser bridge system entirely;

B. Laser bridge installation on the existing embroidery machine in customer's factory.

C. Laser bridge installation in domestic Chinese embroidery factory.

Suitable for kiss-cutting, embroidery, applique, edge-cutting and hollowing, etc for various fabrics.

garment piece embroidery, fabric, home textile embroidery and cutting, sari, saree multiply embroidery, embroidered labels, plush toys, knitwear, home textile, leather goods, fabric decoration, etc.

(1) To install laser systems on embroidery machines. Computerized embroidery, high speed galvanometer engraving and laser cutting combined perfectly, precise cutting result. It creates the leading precedent for engraving on embroidery products, enriches the embroidery technique, increases products level and added value, makes the embroidery products with outstanding individuality, high quality and aesthetics.

(2) It is very suitable for embroidery, edge cutting, hollowing, and applique cutting, engraving and kiss-cutting for various fabric materials; inject the new energy for technology innovation in embroidery industry.

(3) This model is unlimited for the number of embroidery heads, sharing one set laser system. The slim beam spot of laser (reach 0.1mm) and servo motor, ensure the laser moving along with the bridge with high speed, high acceleration, accurate position and working efficiency.

(4) Advanced lens and dynamic focusing system ensure the laser beam with high speed and precise cutting, within large-size area, compared with traditional belt guide and laser heads derived with X, Y axis motor, this laser cutting quality is better.

(5) It adopts GoldenLaser control software, strong pertinence, convenient operation, high safety. Also optional equipped laser cutting table and rolls-to-rolls feeding device, these all advanced collocation, not only provide new solutions for clients, but also initiate epoch in embroidery and laser industry.

Combines computer embroidery,high-speed laser cutting and engraving.

No limitation on embroidery heads,sharing one set of laser bridge system.

Three mode to chose: QJD 800-1-150 for one set of embroidery machine (single-beam structure,9m beam length,length of embroidery machine up to 8m); QJG 800-2-150 for two sets of embroidery machines (single-beam structure,18m beam length,can equip with two 8mm embroidery machine) ; QJG 800-4-150 for four sets of embroidery machines (two beam structure,18m beam length,can equip with four 8m embroidery machine).

Suits for bulk production with embroidery applique,various designs and Sarees.

Contact Supplier