EVA Adhesive film Feature:
- Superior durability - 20 years resistance against weather, high temperature and high humidity
- Excellent adhesion - 60 N/cm when applied to glass for TPT film.
- >90% light transmission
- Excellent encapsulating properties
- Film is not adhesive at room temperature to ease manufacturing operations
- Cross linking and enhanced bonding are achieved when the film is heated and pressed
The EVA film laminating technologies
Laminating Steps
Laminating: laminate the glass, EVA film, connected silicon cells, EVA film, TPT backsheet foil in sequence.
Vacuum pumping: Place above laminated pieces into the lower room of the double-vacuum press. Then the upper room and the lower room are vacuumed synchronously about 6min.
Heating: the upper and the lower room are kept vacuum, meanwhile heat the laminated pieces.
Press: Laminated pieces are heated under 135°C-140°C conditions, the upper room cancel vacuum and get back to atmospheric pressure. At that time the lower room is still kept vacuum, that is to say, the upper room press on the laminated pieces of the lower room.
Curing: Isothermal curing under the curing temperature.
Cooling and framing: After isothermal curing, cancel the vacuum of the lower room, open the top of the press, and take out the laminated modules. Then cut off the extra EVA of composite lamination edge. Moreover seal frame and equip the termainal box, assemble PV modules at last.