DALI power suppply
Central DALI power supply rated at 200 mA (DALI standard allows max. 250 mA) The controls interface of a DALI ballast normally sources 2 mA, with 64 individual addresses this will source 128 mA. The remaining
72 mA can be used to power other DALI controls without an internal power supply such as the DALI GC and
DALI SC.
I. Description:
- For supplying 200 mA for DALI devices or control modules without their own power supplies
- For installation in switching cabinets
- Automatic monitoring of the connected luminaries
- The built-in relay isolates the connected equipment from the power supply via an external contactor if all the luminaries are switched off
- The ballasts are switched on and set to the required status via DALI commands
II. Technical parameters: |
Voltage | 120-240V | Frequency | 50/60Hz | Max. load | 4W | Output | ---- | DALI | Max. current | 200mA | Working temperature | 0 ... +50 °C |
|