DTG-E2 Gyroscope for dynamic well logging

Payment Terms:	T/T

 This dynamically tuned gyro is designed for the case of the drilling field, have overcomed the following technical difficulties, its operating temperature up to 100 degree centigrade. In the drilling field, inertial devices is greater and more adaptable than flying field, because of its poor working conditions, especially the higher environmental temperatures, therefore, the temperature of adaptation and life requirements are very serious.

N0.	Item		Specification
1	Performance Parameter	Random Drift (1σ)	≤0.3°/h
		Drift Stability (1σ)	≤0.2°/h
		g-independent	≤12°/h
		g-dependent	≤3°/h
		Frequency Response	≥60Hz
2	Technological parameter	Power Supply(Three Phase)	400 Hz
			12 V
		Power Supply(SinglePhase)	16 KHz
			7 V
		Synchronous Speed	12,000
		Power for Start Up	4 W
		Operating Current	≤0.18 A
		Synchronizing Time	≤10 S
		Output Gradient	14 mv/'
		Master torquer	7Ω
		Vice control torquer	2Ω
3	Torquer scale factor	Master torquer	≥500 °/h/mA
		Vice control torquer	≥10 °/h/mA
4	Max.Tracking Speed		≥200 °/s
5	Output Nonlinearity		≤0.1%
6	Life Time		≥5000
7	Operating Temperature		-10~+100℃
8	Shock Overload(8ms)		≥50 g
9	Physical Parameter	Dimension	φ29×52 mm
		Mounting flanges	30×30 mm
		Weight	≤130 g