automatic plastic stretch blow mould machine

ZQ-A1500 automatic plastic stretch blow mould machine
ZQ-A1500, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,1.5L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can't transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.

Settings:
a).PLC colour display: OMRON(JAPAN)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor DELTA(TAIWAN)
d).Other electric parts are all world-famous brand

ZQ-A1500 automatic plastic stretch blow mould machine
Features:
A.     Stable performance with advanced PLC.
B.     Conveying preforms automatically with conveyor.
C.     Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D.     High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E.     High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.     No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G.     Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H.     Strong clamping force with high pressure and double crank links to lock the mold.
I.     Two ways of operating: automatic and manual.
J.     Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K.     Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L.     Contamination is avoided for the bottle body.
M.     Ideal effect of the chilling with the chilling system.
N.     Easy installation and starting
O.     Low rejection rate: less than 0.2 percent.

ZQ-A1500 automatic plastic stretch blow mould machine

TYPE	ITEM	ZQ-A1500	ZQ-A1500-2	ZQ-A1500-3	ZQ-A5000	ZQ-A5000-2
CONTAINER	Number of cavity	1	2	3	1	2
	Output	1000-1300 pcs/hr	1700-2100 pcs/hr	2800-3100 pcs/hr	500-700 pcs/hr	1200-1300 pcs/hr
	Max.container volume	1.5L	1.5L	1.5L	5L	5L
	Max.neck diameter	38mm	38mm	38mm	100mm	100mm
	Max.container diameter	105mm	105mm	105mm	180mm	180mm
	Max.container height	350mm	350mm	350mm	350mm	350mm
ELECTRICAL SYSTEM	Number of lamp	28 pcs	28pcs	40pcs	28pcs	48pcs
	Max.heating power	22kw	42kw	60kw	42kw	60kw
	Installation power	25kw	44kw	65kw	44kw	63kw
	Actual power consumption	16kw	28kw	40kw	30kw	40kw
AIR SYSTEM	Operatating pressure	7kg/cm²	7kg/cm²	7kg/cm²	7kg/cm²	7kg/cm²
	Low pressure consuming	900 Ltr/min	1200 Ltr/min	1600 Ltr/min	1200 Ltr/min	1600 Ltr/min
	Blowing pressure	≤30kg/cm²	≤30kg/cm²	≤30kg/cm²	≤30kg/cm²	≤30kg/cm²
	High pressure consuming	1200-1600Ltr/min	2000-2500Ltr/min	2800-3000Ltr/min	2000-2500Ltr/min	3000-3500Ltr/min
CHILLER WATER	Operating pressure	5-6 kg/cm²	5-6 kg/cm²	5-6 kg/cm²	5-6 kg/cm²	5-6 kg/cm²
	Temperatuer	10°C	10°C	10°C	10°C	10°C
	Consuming	3600kcal/hr	5600kcal/hr	7600kcal/hr	5600kcal/hr	5600kcal/hr
	Flow rater	20Ltr/min	30Ltr/min	40Ltr/min	30Ltr/min	30Ltr/min
MACHINE	Machine dimension	2.9×1.7×1.85(m)	3.1×1.45×1.85(m)	4.20×1.60×1.9(m)	3.3×1.75×1.9(m)	4.35×2.0×1.9(m)
	Machine weight	1.6T	1.8T	2.3T	2.0T	3.0T

Contact Supplier