Lexia-3 V48 Citroen Peugeot Diagnostic PP2000 V25 Diagbox V6.10
108.88 USD
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | T/T, WU |
| Place of Origin: | Guangdong |
Company Profile
| Location: | China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company, Distributor/Wholesaler, Service |
| Main Products: | Lexia-3 Citroen, OBD BENZ TOOL, Peugeot Diagnostic, Tacho Universal 2008 Never Locking, Bmw Ops Diagnostic |
Product Detail
| Means of Transport: | Air |
|---|---|
| Brand Name: | obd2repair |
| Packing: | box |
Product Description
skype:obd2tuning.com
The Lastest software version:
The Lastest software version:
PP2000:25.01?11A)
LEXIA-3:348.01?V48)
Diagbox:V6.10(available) (Update V6.01 to V6.10/(6.01 to V6.02 to V6.03 to V6.04 to V6.05 to V6.06 to V6.07 to V6.08 to V.09 to V6.10)
can support to 2011 vehicles(cars) including:
Peugeot: iON107 206 207 NOGGAR 307 308 RCZ 407 408 508 607
807 1007 3008 4007 5008 BIPPER PARTNER EXPERT
BOXER 106 205 306 309 405 406 605 806.....
807 1007 3008 4007 5008 BIPPER PARTNER EXPERT
BOXER 106 205 306 309 405 406 605 806.....
CITROEN:C-ZERO C1 C2 C3 DS3 DS4 DS5 C5 C6 C8 C15 SAXO NEMO
JUMPY AX BX ZX XM XSARA EVASION C-ELYSEE XANTIA
ELYSEE BERLINGO.....
NEW UPDATE AVAILABLE!!! Update by CD!!!!
PP2000/LEXIA-3 Interface works for both Citreon and Peugeot!
PP2000/LEXIA-3 Interface works for both Citreon and Peugeot!
Compatible Vehicles:
It compatible with Citreon cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on.But please pay attention,according to our customer's experience,this item can not works good at C5 new models.
It compatible withmost Peugeot cars from 1995,can support to 2011,
It compatible withmost Peugeot cars from 1995,can support to 2011,
If customer have this two types of cars,please pay attention.please check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Supported functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Package includes(Full set):
1pc x Main unit
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable(16pin)
1pc x 16pin to 2pin Cable
1pc x Main unit
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable(16pin)
1pc x 16pin to 2pin Cable
1pc x PAS 30pin to 16pin Cable(for old car)
1pc x Instruction for Installation and Activation DVD for PP2000 Lexia-3 Diagbox
Software version information:
Lexia 3 : v48 /348.01
PP2000:11A / V25/V25.01
Diagbox: V6.06 Update 6.01 to V6.10
Update DiagBox V6.01 to V6.02
Update DiagBox V6.02 to V6.03
Update DiagBox V6.03 to V6.04
Update DiagBox V6.04 to V6.05
Update DiagBox V6.05 to V6.06
Update DiagBox V6.06 to V6.07
Update DiagBox V6.07 to V6.08
Update DiagBox V6.08 to V6.09
Update DiagBox V6.09 to V6.10
Update DiagBox V6.01 to V6.10
Language Inculding:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
If you want know detail techinical support for this item,please click here.
If you have problems with installation,please contact with our customer service,we will provide video to teach you how to install it