Product Name: Shaking Head Heat Transfer Machine
Product Model: ZS-HB
(Usages)
This Shaking Head Heat Transfer Machine can transfer sublimation and solvent ink picture to textil cloth.It also can do the heat treatment about screen print,plasmagel and so on.
(Features)
Digital control system ensure the high precision(1℃)
Digital time display ensure high precision of time.
The heat pipe connect with the heat plate,the special design of the heat plate ensure the safety and fast heat conductivity.
The heat plate has adhesion proof cladding.
It has fireresistant silical gel,thus can undertake 400℃.
The pressure can be adjust and easy to operate.
Excellent appearance,small volume and high efficiency.
(Operation Process)
Turn on the power switch
Push the heat plate to the right
Adjust the temperature to the need one(usually 120℃-200℃)
Adjust the time controller to the needed one (usually 5s-20s)
Put the cloth on the stamping plate,then put the stamping paper on the cloth(notice the sides of the paper),dawer the heat plate to the original position.Press the handle,when the time reached the setted one,it will give warnin,then put the handle to the original position.
(Notice)
The whole machine should connect with safe earth protection.
Take care of the pros and cons.
When it cool off,ripdown the stamping paper.First wipe the stamping paper,then ripdown it after 5-10seconds.
When finished stamp.pleas ripdown the stamping paper.
The stamping result was decided by the correct temperature,time and pressure.
The thickness of the cloth ,the material and the kind of the stamping paper also will effect the stamping result.
Before volum-production,pls test.
(Maintenance)
If the pressure is too high or light,first loose the nut,then turn the nut to adjust the pressure,when finished it ,lock it
when the temperature reached the setted one but the heat plate is not hot,please check the connection of temperature and thermocouple.(the temperature will reach 180℃ about 15 minutes)
when the time reached to the setted one but the warning is not given or warning endlessly,pls check the micro movement contact whether proper.
Make sure the pressure is not too high or the bearing will be damaged.
If there is quility problem.pls contact with our company.