ASME Serial Block(USA standard)(NDT ultrasound ultrasonic calibration)
| Payment Terms: | Paypal, L/C, T/T, WU |
|---|---|
| Place of Origin: | Guangdong |
Company Profile
| Location: | Guangzhou, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
| Main Products: | B Scanner, Ultrasound Diagnose |
Product Detail
| Model No.: | Sonostar |
|---|
Product Description
Specifications
Ultrasonic block
American standard
(The basic calibration block fabricated for customer supplied section of pipe of the same diameter, schedule, heat treatment and material type as the material being examined. Contains 4 nothces: longitudinal, and circumferential on both OD and ID at a depth of 10% of the wall thickness. Notches are 1/4" max. wide x 1" min. long. Block is fabricated in accordance with ASME SEC. V article 4 Fig. 434.3.)
ASME Basic Calibration Block
(Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 38mm deep minimum at 2.5mm diameter. Hole locations through the thickness are 1/4, 1/2 and 3/4 T. Also contains 2 EDM notches measuring 2% T deep * 6.4mm max wide * 25 long min. In accordance with ASME Sec V T-434.2.1)
Description | Standard Made To | Material Size |
Setting sensitivity levels for weld testing. Sizes and locations of flaws are dependent on weld thickness. | ASME Article 5 Fig T-546.1 | Steel Size dependent on weld thickness |
Standard No. | Tyep |
ASME BPVC-V | 1#(t25mm) |
2#(t2550mm) | |
3#(t50100mm) | |
4#(t100mm) | |
The pipe welding check block | |
1#(t25mm ) | |
2#(t2551mm) | |
3# (t51102mm) | |
4# (t102152mm) | |
5# (t152203mm) | |
6#(t203254mm) | |
7#(t254mm) |
