Products Features:
An Engine Pad Heater is an electric heater that heats the engine of a car to give quicker starts in cold weather. It is thin, flexible
heating pads and are attached to the outside of an oil pan or fluid reservoir, a hydraulic tank for example. The pads have a special
"hi-tech" adhesive on one side. Once installed, the heater will never fall off.They are connected to normal AC power overnight or
before driving, via regular power outlets that are fed through a vehicles grille. This allows easier starting in cold temperatures,by
keeping the coolant warm. Heaters are also available for motor oil so as to warm the oil and give the engine lubrication from the
beginning of start-up. The rapid heat circulation caused by block heaters also aids the initial vaporization of fuel in the engine;
because of this effect, block heaters reduce pollution, as poor fuel vaporization causes much higher emissions.
Technical Parameters:
1 )Maximum temperature resistance of insulator;300C
2 )Maximum operation temperature:250C
3 )Insulation Resistance:≥500 MΩ/DC 1000V
4 )Breakdown Voltage:≥ AC1500v/5S
5 )Capacity Tolerance:±5%
6 )Temperature range:-60C~250C for continuous heated,Heating element:both etched foil and wire-wound element available.
Benefits:
Ensures your vehicle and equipment starts on cold mornings
Provides immediate lubrication
Virtually eliminates cold start wear
Improves crankability at the coldest extremes
Fast, easy and inexpensive to install
Improves fluid pumpability
Reduces system warm-up time
Reduces pump & component damage bonds to Oil Pan or fluid reservoir
Raises oil temperature to operating levels
immediate oil pressure throughout engine
extend starter motor Life
Warms important internal parts
Reduces system warm-up time
No maintenance
Ideal for hydraulic tanks
Will not burn out like immersion oil sump heaters
120 & 240 volt a.c. and now 12 & 24 volt d.c.
Raises oil temperature from -40°F(-40°C) to +160°F(71°C) in 1.5 hours
No need for a block heater, magnetic heater or dip stick heater
Application:
Cars,Vans,Trucks,Transmissions,Gearboxes,Generating Sets,Compressors,Cranes ,Snow Ploughs ,Hydraulic Rams ,Water Pumps, Diesel
Engines, Farm Equipment Marine, Mining & Construction Equipment.
Installation:
called "Peel n' Stick"
1. Clean Surface
2. Peeling Off Backing
3. Smooth Out Pad
4. Gentlemen Start Your Engines
Heaters can be installed in sub-zero temperatures are very easy to install. Everything needed for a complete installation is included with each heater.They are:
- Heater
- Electrical Cord
- Silicone Sealer
- Squeegee
- Tie Wrap
Product Specifications:
Product Name: Flexible Oil Reservoir Heating Pads, Filter Heaters & Engine Oil Pan Heater
Brand: Honeywon
