Coating Thickness Meter CM8855

Product synopsis
Model:CM8855

1.FEATURES

* It meets the standards of both ISO2178

and ISO 2361 as well as DIN, ASTM

and BS. It can be used both in the

laboratory and in harsh field conditions.

* The F probes measure the thickness of

non-magnetic materials (e.g. paint,

plastic, porcelain enamel, copper, zinc,

aluminum , chrome etc.) on magnetic

materials (e.g. iron, nickel etc.) . often

used to measure the thickness of

galvanizing layer, lacquer layer,

porcelain enamel layer, phosphide

layer, copper tile, aluminum tile, some

alloy tile, paper etc.

* The N probes measure the thickness of

non - magnetic coating sonnon

magnetic metals. It is used on

anodizing, varnish, paint, enamel,

plastic coatings, powder, etc. applied

to aluminum, brass, non-magnetic

stainless steel, etc.

* Automatic substrate recognition.

* Manual or automatic shut down.

* Two measurement mode: Single and

Continuous

* Wide measuring range and high

resolution.

* Metric/Imperial conversion.

* Digital backlit display gives exact

reading with no guessing or errors.

* Can communicate with PC computer

for statistics and printing by the

optional cable.

* Can store 99 groups of measurements.

* Statistics is available.

2.SPECIFICATIONS

Display: 4 digits LCD, backlit

Range: 0~1250 μm/0~50mil

(other ranges can be specified )

Min.radius workpiece: F: Convex 1.5mm/Concave 25mm

N: Convex 3mm/ Concave 50mm

Min. measuring area: 6mm

Min.Sample thickness : 0.3mm

Resolution: 0.1 μm (0~99.9μm);

1 μm (over 100μm)

Accuracy: ±1~3%n or 2.5 μm or 0.1mil

(Whichever is the greater)

Bttery Indicator: Low batter indicator.

PC interface: with RS-232C interface

Power supply: 2x1.5 AAA(UM-4) battery

Operating condition: Temp. 0~50℃ . 

Humidity<95% .

Size: 126x65x35 mm;  5.0x2.6x1.6 inch

Weight: about 81g(not including batteries)

Standard accessories:

Carrying case ...................1 pc.

Operation manual ............ 1 pc.

F probe in built .................1 pc.

NF probe in built...............1 pc.

Calibration foils ..............1set.

Substrate (Iron) ................1 pc.

Substrate (Aluminium)......1 pc.

Optional accessories: RS-232C cable & software:

1.USB adaptor for RS-232C
2.Bluetooth  interface