Molybdenum Sheet Plate Strip

Molybdenum sheet (Plate Strip) is silver metallic sheets made of pure molybdenum, TZM molybdenum alloy, or high temperature molybdenum. Its thickness is ranging from 0.003 inches to .090 inches. It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields, because of its unique properties, which owns the characteristics of molybdenum.

Molybdenum sheet (Plate Strip) can be divided into three categories according to its processing method, and each processing method has its own standard. They are hot rolling, cold rolling, hot and cold rolling. Hot rolling marked by "R" ranges from 0.6mm to 4.0 mm in thickness. Cold rolling is marked by "Y". It is as thin as 0.02mm, and thick as 0.6mm. Hot and cold rolling is another processing method marked by "X", and its thickness is from 0.08mm to 0.5mm.

Molybdenum sheet's surface condition can be showed in different types, including shiny, matte, satin, or as-rolled condition, which is classified according to thickness and width parameters. Meanwhile, from the point of processing, the surface condition is also divided into polished one or non-polished one. According to buyer's requirement, the surface can be Electrolytic cleaned or Hydrogen-sintered cleaned.

Molybdenum flat products are rolled and annealed to provide the optimum condition for its application. Heat treatment should be considered carefully according to different application.

Pure Moly Sheet (Plate Strip)	The impurity content is not more than %
	Fe	Ni	Al	Si	Mg	C	N	O
Grade Mo-1	0.01	0.005	0.002	0.01	0.005	0.01	0.003	0.008
Grade Mo-2	0.01	0.005	0.005	0.01	0.005	0.01	0.003	0.02

Contact Supplier