Titanium Mesh Demister

Titanium Mesh Demister is a kind of vapor-liquid separating device. Titanium Mesh Demister provides good strength, excellent corrosion resistance. Titanium Mesh Demister is resistant to dilute sulfuric and hydrochloric acid, most organic acids and chlorine gas, and chloride solutions.It is widely used in chemical industry, petroleum, vitriol, medicine, light industry, metallurgy, machinery, environmental protection, etc.

Titanium Mesh Demisters's advantage is simple structure, small size, light weight , easy installation, high removal efficiency, no maintenance or service required, no corrosion or temperature limitations, no limitation on size or shape, reduce air pollution, long life etc.

The Mesh Demister pads is widely used in evaporators, refining vaccum towers, refining lube towers, steam drums, absorbers, scrubbers, separators vessels and knock out drums and any process vessels handling liquid and vapor where complete separation of entrained liquid droplets is desired from gas/vapor phase.

Technical Data:

Typical Limit Drop sizes = 3 microns

Mesh Pad Velocities = 450 fpm

Typical Mesh Pad pressure drop STP = 0.4" w.c.

Mesh Pad + Profile Mist Eliminator Velocity = 1100 fpm

Typical Pressure drop for Mesh Pad + Profile Mist Eliminator combination 0.6" w.c.

Chemical composition
Material		Impurities content, Not more than,%
		Ti		Fe		C	N	H		O	Residual elements,
											single		total
Gr1		allowance		0.20		0.08	0.03	0.010		0.18	0.10		0.40
Gr2		allowance		0.30		0.08	0.03	0.010		0.25	0.10		0.40
Gr3		allowance		0.30		0.08	0.05	0.010		0.35	0.10		0.40
Gr4		allowance		0.50		0.08	0.05	0.010		0.40	0.10		0.40
Physical properties
Material	Specifications mm		State		Room-temperature Mechanical properties, No less than,%
					σb Mpa(ksi)				σ0.2 Mpa(ksi)			δ %		ψ %
Gr1	3.2-6.35		Annealing (M)		240				170			24		30
Gr2					345				275			20		30
Gr3					450				380			18		30
Gr4					550				483			15		25
Gr1	1.6-3.2				240				170			15		---
Gr2					345				275			12		---
Gr3					450				330			10		---
Gr4					550				483			8		---
Gr1	1.0-1.6				240				---			12		---
Gr2					345				---			10		---
Gr3					450				---			8		---
Gr4					550				---			6		---

Contact Supplier