Monel Mesh for food processing

Monel 400 Mesh is Good around most food and corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Monel 400 mesh also has high strength. These characteristics make monel 400 mesh widely applied in food processing and cooking.

Monel 400 mesh has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters. This mesh's good resistance to a variety of corrosive conditions contributes to the wide application in marine and other non-oxidizing chloride solutions.

Monel 400 mesh is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. However, its high copper content, make alloy 400 can be rapidly attacked by nitric acid and ammonia systems.

Manufacture's Objective Comments:

   Monel 400 mesh is immune to chloride ion stress corrosion cracking in typical environments. Besides, it is good corrosion resistant in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous.

  Monel 400 Mesh would be attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F. However, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

  Monel 400 mesh also has good Adaptability to wide range of application temperature. It maintains good mechanical properties at subzero temperatures, as well as in temperatures up to 1000° F, The melting point is 2370-2460° F. It offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.
                                          
                                                Twilled Woven Monel 400 wire Mesh:

Contrary to plain weave, two lines of the main and cross wires are interweaved alternately. It is possible to use a wire thicker then the mesh of twilled weave and, it ha an advantage of vulcanization being small because the angle of refraction of the main and cross wires is big. It is suitable for cases of comparatively high or much load.

Monel Mesh Available Specifications:

Mesh: 0.5-250 mesh/InchThickness: Min0.05mm

The Service Part has more information about mesh form.

Product Description: The product produced by us is of good quality and is priced reasonably.

         Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.

        High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.

       Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

        Transportation:     By air:   Beijing International Airport    OR        By sea:   Trianjin Seaport

We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).

Contact Supplier