FeCrAl 0Cr21Al6Nb Infrared Ray Wire Mesh
| Min. Order: | 30 Square Meter |
|---|---|
| Payment Terms: | L/C, D/P, D/A, T/T, WU |
| Supply Ability: | 50000sq.m./Month |
| Place of Origin: | Hebei |
Company Profile
| Location: | Beijing, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
| Main Products: | Nickel Wire Mesh, Monel 400 Wire Mesh Demister, Incoloy Sheet Plate Strip, Monel Sheet Plate Strip, Inconel 625 Alloy Strip Sheet Plate |
Product Detail
| Means of Transport: | Ocean, Air, Land |
|---|---|
| FeCrAl alloy mesh: | FeCrAl alloy mesh |
| Production Capacity: | 50000sq.m./Month |
| Packing: | Standard package |
| Delivery Date: | 2-30days |
Product Description
FeCrAl 0Cr21Al6Nb Infrared Ray Wire Mesh
Heanjia Super-metals Co., Ltd. supplies FeCrAl 0Cr21Al6Nb Infrared Ray Wire Mesh. The FeCrAl 0Cr21Al6Nb Infrared Ray Wire Mesh with the characteristics of high resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, as well as the lower price, it is widely used in industrial electric furnace, household electrical appliance and far infrared ray device.
Chemical Composition (%) and Properties
Type | 0Cr21Al6Nb | |
Chemical composition | Cr | 21.0-23.0 |
Al | 5.0-7.0 | |
Re | opportune | |
Fe | Rest | |
Maximal Temperature (oC) | 1350 | |
Resistivity 20oC (10-6ohm*m) | 1.45 | |
Density(g/cm3) | 7.1 | |
Thermal conductivity (KJ/m*h*oC) | 46.1 | |
Extend strength (a*10-6/oC) | 16 | |
Melting point ( oC) | 1510 | |
Tensile strength(N/mm2) | 650-800 | |
Percentage elongation (%)) | >12 | |
Section shrink rate(%) | 65-75 | |
curve strength(F/R) | >5 | |
hardness (H.B.) | 200-260 | |
Microstructure | Ferrite | |
Magnetism | Magnetic | |
Mesh Specification
Wire Mesh | GB/T 5330.1 ; GB/T 17492 ; JB/T 9155 | 0.5-250 mesh/Inch; Thickness: Min0.05mm |
The manufacture of mesh is started with producing wire. The wire production includes: forging, rolling, annealing and drawing. The wire with right material and wire diameter will be produced. Then the warp wires will be put and prepared on the weaving machine, and then start weaving. From wire to mesh, manufacture process is operated with high standard quality control system. There will be quality test for each batch of product, such as test to diameter tolerance, content, mesh aperture, etc.
Packing Process & Transportation
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air or By sea
Other Terms
Minimum Order Quantity | Manufacture Period | Payment Terms | |
100 KG | 10-15 Days (Small Quantity) | 20-40 Days (Mass Quantity) | L/C, T/T, Western Union |
