15mm multi-jet dry-dial type remote-reading Water Meter
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
Product Detail
| Model No.: | LXSG(R)-15Y-50Y |
|---|
Product Description
This range of water meter is used to measure the total quantity of cold potable water which consumed in household or a resident unit passing through the pipeline. As equipped with a built-in sensor, it can be used for a remote reading transmission system and converting the water consumption into electric output.
PRODUCT FEATURE:
lKeep all measuring data of common water meter, such as sustain its measuring accuracy and numeral display etc.
lAdopting unique design,advanced testing measures ensure a secure transmission and maximum distance between connected meter and a data collector is 150m
lTransmission Sensors with high exactly and resistance to interference enable a long term service
lApplicable to various kinds of data collector
lThe Sensors for option: Reed Switch / Hall Effect / Optical Switch
lThe pulse constant: 10 pulse/M3, 30 pulse/M3 or 100 pulse/M3
WEIGHT AND DIMENSIONS
Meter Size DN (mm) | Length L | Width W | Height H | Body Thread D | Weight Kg |
mm | |||||
15 | 165 | 98 | 104 | G 3/4B | 1.50 |
20 | 190 | 98 | 106 | G 1B | 1.70 |
25 | 230 | 103 | 112 | G1-1/4B | 2.4 |
32 | 230 | 103 | 117 | G1-1/2B | 2.7 |
40 | 245 | 124 | 147 | G2 B | 4.8 |
50 | 280 | 125 | 172 | G2-1/2B | 8.3 |
D=165 GB42164-84 D1=125 | 11 | ||||
MAXIMUM PERMISSIBLE ERROR
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is ±2% (Hot water meter±3% ).
WORKING CONDITION
Water temperature: 0℃≤t≤40℃(For cold water meter)
0℃≤t≤90℃(For hot water meter)
Water pressure: ≤1.0MPa
INSTALLATION REQUIREMENTS
1.The meter should be installed in horizontal position with the register face upwards
2.Pipeline must be flushed before installation
3.The meter should be constantly full of water during operation
SENSORS CONNECTING METHODS
a)Two cores wire for reed switch sensor with no polarity
b)Three cores wire for hall effect sensor, red for voltage positive polar, green for output, black for common ground
c)Four cores wire for optical switch sensor, red for voltage positive polar,green for output, yellow for standby detection, black for common ground
d)Note: 1. The connecting wire 1m-1.2m
2. The connecting wire can choose of stainless steel jacket wire at 500m-900m long with end connecting threaded M8X1 at 5m long