CNC plasma cutting machine

(1) Working stability, high frequency interfere effectively plasma, lightweight portable;

(2) Support two cutting ways of flame and plasma;

(3) Economic benefits, the structure and design is contracted. it adopts humanistic positive man-machine conversation and operate easily;

(4) Cutting has high quality, high effect level, high precision.

(5) English and Chinese interface can free to convert;

(6) Pre-sale will train and after-sale will track service.

   Portable numerical control flame plasma cutting machines can be programmed to cut any plane shape parts composed of beeline and arc, which are same as large gantry cutting machines. It is equipped with a 5.7 inch LTD with dynamic and static graphical display. It is directly perceived and very easy to learn .It can be programmed to cutting parts directly, and also can be operated in computer translating instructions into a program file by CAD program, and then deducing it via U hardware. The standard positioning of this machine is flame cutting, external hanging plasma cutter is also workable.

Less investment, the higher cutting efficiency, lower operating and maintenance cost!

when cutting the thickness of the steel plate under 30mm , It has better advantage . Cutting costs about one-tenth of the laser cutting edge and one-sixth of water jet cutting.

This product is suitable for large, medium and small mines, widely used in automobile, shipbuilding, engineering machinery, agricultural machinery, suitable for carbon steel (flame cutting), and stainless steel. 

CAD drawings and computer graphics can be reduced to G code which used to cutting components,

Code file G deposit ORM, and input into the cutting machine, the system will automatically make the G code convert cutting program.

This product with USB interface, convenient program transmission. In material software Set cutting compensation.

1,Input voltage/power/frequency         220V±10%V/220W/50HZ.

2, LCD specifications                   5.7 inch.

3, Effective cutting range of standard size :

                                  NHC-1020 1000(width) ×2000(length)mm

                                  NHC-1225 1250(width) ×2500(length)mm

                                  NHC-1525 1500(width) ×2500(length)mm

   Cutting length can be customized according to the customer's require.

4, Vertical guide practical length × width × thickness

                          NHC-1020  1530×50×60mm

NHC-1225  1780×50×60mm

NHC-1525  2030×50×60mm

5, Horizontal guide practical length ×width× thickness

                         NHC-1020  1530×50×60mm

NHC-1225  1780×50×60mm

NHC-1525  2030×50×60mm

6, The number of track support

                 NHC-1020  2pieces;NHC-1225  3pieces;NHC-1525  3pieces.

7, Track support long × width × thickness                 500×80×40mm.

8, Cutting thickness                           5-150 MM (flame cutting).

9, Cutting speed                               50-2000(maximum4000)mm/min.

10, Plasma cutting depth                   Depending on the plasma power

11,Cutting way                                  Flame (oxygen + propane or oxygen + acetylene)

                                                       Plasma (configuration plasma cutting machine),

12, Operation precision                      ±0.2mm/m.

13, Machining accuracy                     ±0.5mm/m.

14, Torch and height                         flame, electric turn up(±50mm).

15, Applicable gas                             Oxygen + acetylene or   oxygen+ propane

16,Host weight                                   20KG.

17, Gas pressure                                  maximum 0.1Mpa

18, Oxygen pressure                            maximum 0.7Mpa

6, System has power failure of memory function and back parameter and automatic perforation cutting function.

7, System has manual and electric going up and down control function.

8, Has cutting gap compensation function.

9, Electronic clutch operation, convenient and realize rapid positioning (and stop button).

10, The temperature fan, and start up when need pneumatics. It can extend fan's life-span.

11, System can store 30 files, and each file can 2000 lines. U dish can be stored 2GB.

12, High-speed 16-bit single chip, FLASH storage procedures and external USB read transmission program.

13, High-subdivision stepping motor driver, smooth movement, low noise, high precision operation.

14, The cutting speed can set to maximum 4 meters per minute, that can meet the needs of plasma cutting.

2, The host part, the MOD adopts to prevent magnetic structure, ensure reliable and stable operation of the CNC system.

3, Driven is 1.8 ° stepper motor.

4, Horizontal and vertical guide use aluminum core shaft, In side has strengthened by mechanical principle, making its shape.

(1) Methods: (1) using AutoCAD powerful function to draw parts drawing and material, and through DXF file data processing, automatically make cutting code.

(2) Craftwork processing: the point can be used the edge cutting or roll cutting, Cutting compensation function can calculate the center of the actual cutting track of the flame, it also can set direction and path cutting.

(3) Mating methods: based on the AutoCAD can make the material of parts graph translation, rotation, copy, mirror, scaling, array, etc. By the window technology enlargement processing.

(4) Screen simulation: cutting process can be simulated processing on the screen, simulation cutting process and scale, moving.

Models	NHC-1020	NHC-1225	NHC-1525
Input powersource	220±10%V AC50HZ 220W
Cutting way	Oxygen +propaneor acetylene;Configurable plasma cutting machine
Effective cutting range(mm)	1000×2000	1250×2500	1500×2500
Guide long* width * thick (mm)	2500×273×60	3000×273×60	3000×273×60
The numberof track support	2	3	3
Tracksupport length × width × thickness mm	500×80×40
Cutting speed mm/min	50-2000(max4000)
Cutting thickness (Flame) mm	5-150(Oxygen + acetylene or propane)
Cutting thickness (Plasma)(mm	plasmapower
Operationprecision	±0.2mm/m
Torch andturn up	flame,electricturn up(±50mm)
Host weight(kg)	20
Gas pressure (Mpa)	Maximum 0.1
Oxygenpressure (Mpa)	Maximum 0.7
Applicablegas species	Oxygen+propane or acetylene

Contact Supplier