Water Source Heat Pump Water Loop

Air source heat pump water heater units

Working principle:

Using inverse heat carnot principle, with very little energy absorption, low heat in the air compressor, through high heat transmission, compressed into hot water tank, heat and energy, so it is low, the efficiency high, speed, good safety, environmental protection, continuous supply of hot water. As the hot water system has advantages over indescribable.

Heat pump water heater units of energy conservation and follow the laws of thermodynamics, use the heat pump 2 principle, need only a fraction of the cost function (power), the machine will be in low temperature environment (air or water, etc.) of the heat transfer under high temperature environment to the water heater, water heating area.the temperature. Compared with the heat pump can be fitted, water is cannot spontaneously from a lower to high, will be able to high water, must use a water pump, electric power, can be part of the consumption of water to high water tank. Also, according to the second law of thermodynamics, quantity of heat also is cannot spontaneously from low to high temperature environment in the environment (transfer), and to achieve this objective, there must be a machine part, mechanical work (for example, the quantity of heat low temperature environment can be transferred to high temperature environment. This machine is called "heat". The heat is low in the air or water to remove heat, along with the energy used to transform itself to the heat, high temperature environment.

Heat pump water heater unit specification model parameter list:

SYRB30A specifications 62A - SYRB 185 SYRB - 290 SYRB - 410 SYRB - 81 SYRB - 1810

Compressor input power (kw) 4.39 2.9 17.20 8.5 1.85 0.94

Standard configuration output power (kw) 4 dec 18 36 70 8.0

Largest eer (cop) 6.2

Water temperature range (c) (2-45

The highest water temperature (60 ° c)

Operating environment temperature (c) - 10 ° to 45 °

Work power (v/speed) AC220/50 AC380/50

Tubes connect diameter (mm) and 25 25 40 40 50

Features;

Conservation:

Operation cost is electric boiler 1/4, fuel boilers of 1/3, gas boiler 1/2, solar water heating system is energy-saving. High energy saving effect, can very obvious.

Money:

Heat pump units installed on the roof of their building or outdoor, without boiler, saving land investment, Without inspection and running surcharge, Storage and transport without fuel, Without special need, Without complex maintenance or overhaul, the investment capital is recovered in short.

Safety:

Heat pump units without fuel leak, fire, explosion safety hazard. Unit consists of the voltage protection, low voltage protection, compressor over-current, overload protection, ultra high temperature, temperature automatic control of water tank protection safety protection, fundamentally eliminate leakage, stem from the burning, high temperature, safe hidden trouble.

Environmental protection:

Heat pump units to environmental pollution, without any energy conservation and environmental protection products, belong to high conforms to China's energy industry and environmental protection policy.

Simple:

Automatic intelligent control unit, modular design, installation is simple and easy to use.

Durability:

JiXuan with famous brands compressor, using five heavy rust technique and durable.

Contact Supplier