Digital Satellite Receiver Dreambox Dm 500

Place of Origin:	Guangdong

Features:
1)250 MHz IBM PowerPC Processor (350 Mips)
2)Linux Operating System
3)1 x Smartcard-Reader
4)MPEG2 Hardware decoding
5)100Mbit full duplex Ethernet Interface
6)2 LED status
7)unlimited channel lists for TV/Radio
8)channel-change time < 1 second
9)full automatic service scan
10)supports directly bouquet-lists (indirect unlimited)
11)supports EPG (electronic program guide)
12)supports multiple LNB-Switching control (supports DiSEqC)
13)fully adaptable OSD in many languages (skin-support)
14)SPDI/F Interface for digital bit stream out (AC-3 / DTS)
15)1 x Scart-interfaces (fully controlled by software)

TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming
LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 10W / 12V
Input voltage:
DC12V,alternating acurrent +/- 15%
Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A