ferrite arc magnets
| Place of Origin: | Anhui |
|---|
Company Profile
| Location: | he fei, Anhui, China (Mainland) |
|---|
Product Detail
| Model No.: | TDKFB5 |
|---|
Product Description
Arc Ferrite segment , Magnet, magnetic stator motor
We have rich experience in supplying Europe moter users, we have ISO 9002 certified.
We'd pleased to supply full set of PPAP reports with samples to you.
makes them highly resistant to demagnetizing fields. When designing the ferrite magnets for a particular application,primary consideration should be given to its shape limitation due to the powder
metallurgical manufacturing process and the temperature dependence of ferrite materials.
Ferrite Magnets has good anti-corrosion performance, no surface treatment
needed. There are two manufacturing process for ferrite magnets: Dry Process
Wet Process. By dry process, can produce isotropic & anisotropic magnets; by
wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets
are not oriented and can be magnetized in any direction; anisotropic ferrite magnets
are different, they are all oriented in the manufacturing direction, and should
be magnetized in the direction of orientation. For dry process, the tool can
be changed and developed easily, while for wet process, it is complicated to
change the tool and the tooling charge is much higher. At present, we have put our
emphasis on arc segment magnets for electric motors, We specialize in ODM&OEM variours magnet rotors for motors. Magnetic rotors which are made by plastic injection outside NdFeB magnets or ferrites in can, high in efficiency and working with low noise. They are widely applied in cars, water pumps, disk drivers, starting motors of motor bikes and stepping motors, etc.
We have rich experience in supplying Europe moter users, we have ISO 9002 certified.
We'd pleased to supply full set of PPAP reports with samples to you.
makes them highly resistant to demagnetizing fields. When designing the ferrite magnets for a particular application,primary consideration should be given to its shape limitation due to the powder
metallurgical manufacturing process and the temperature dependence of ferrite materials.
Ferrite Magnets has good anti-corrosion performance, no surface treatment
needed. There are two manufacturing process for ferrite magnets: Dry Process
Wet Process. By dry process, can produce isotropic & anisotropic magnets; by
wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets
are not oriented and can be magnetized in any direction; anisotropic ferrite magnets
are different, they are all oriented in the manufacturing direction, and should
be magnetized in the direction of orientation. For dry process, the tool can
be changed and developed easily, while for wet process, it is complicated to
change the tool and the tooling charge is much higher. At present, we have put our
emphasis on arc segment magnets for electric motors, We specialize in ODM&OEM variours magnet rotors for motors. Magnetic rotors which are made by plastic injection outside NdFeB magnets or ferrites in can, high in efficiency and working with low noise. They are widely applied in cars, water pumps, disk drivers, starting motors of motor bikes and stepping motors, etc.
.jpg)
