It is equipped with a pair of Morse centers of 4# rigidness, which escalates the measuring precision and increases the support strength on measured parts. It can be used for the radial run-out, end run-out and tilting circular run-out. The design of the meter stand is deliberate and reasonable, and it can be adjusted easily to all directions. The operation is easy and the rigidness of the meter stand is good, which improved the delicacy of the instrument. It is especially suitable for the measurement of grinded parts.
| Item No. | Max. Measuring Length (mm) | Max. Measuring Diameter (mm) | Horizontal (μm) | Vertical(μm) |
| 2010 | 200 | 200 | ≤8 | ≤5 |
| 3010 | 300 | 200 | ≤8 | ≤5 |
| 3017 | 300 | 340 | ≤8 | ≤5 |
| 5017 | 500 | 340 | ≤8 | ≤5 |
| 5025 | 500 | 500 | ≤8 | ≤5 |
| 10017 | 1000 | 340 | ≤10 | ≤8 |
| 10025 | 1000 | 500 | ≤10 | ≤8 |
| 15017 | 1500 | 340 | ≤10 | ≤8 |
| 15025 | 1500 | 500 | ≤10 | ≤8 |
| Item No. | Max. Measuring Length (mm) | Max. Measuring Diameter (mm) | Horizontal (μm) | Vertical(μm) |
| 2010 | 200 | 200 | ≤8 | ≤5 |
| 3010 | 300 | 200 | ≤8 | ≤5 |
| 3017 | 300 | 340 | ≤8 | ≤5 |
| 5017 | 500 | 340 | ≤8 | ≤5 |
| 5025 | 500 | 500 | ≤8 | ≤5 |
| 10017 | 1000 | 340 | ≤10 | ≤8 |
| 10025 | 1000 | 500 | ≤10 | ≤8 |
| 15017 | 1500 | 340 | ≤10 | ≤8 |
| 15025 | 1500 | 500 | ≤10 | ≤8 |
