Min. Order: | 1 Set/Sets |
---|---|
Trade Term: | FOB |
Payment Terms: | T/T, WU |
Supply Ability: | 2000sets/month |
Place of Origin: | Guangdong |
Location: | Guangzhou, Guangdong, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | SN-400W Wind Turbine, Wind Solar Street Light, Wind Solar Controller, Small Wind Turbine SN-600W, Wind Turbine |
Model No.: | SN-WSL0.6K-12/24V |
---|---|
Means of Transport: | Ocean, Air, Land |
Brand Name: | Sunning |
control: | light and time control |
protection: | overcharge, overload,discharge |
charging: | MPPT charge |
voltage: | 12v/24v |
wind input: | 400w |
solar input: | 180w |
Production Capacity: | 2000sets/month |
Packing: | carton |
Delivery Date: | 15 working days |
Name | Wind solar street light controller | Wind solar controller | |
Working mode | Street light(L) | Standard controller(K) | |
Applicable batteries | Valve Regulated Lead-Acid Battery | ||
Controller working | PWM | ||
Applicable wind motor power | 400W/600W/1000W | ||
System voltage | 12V/24V/48V | ||
Applicable solar panel current | 10A | ||
Over charge protection voltage | 14.1-14.5V/28.2-29.0V | ||
Over discharge protection voltage (lower limit) |
| 10.8±0.3V/21.6±0.6 V | |
Over discharge recover voltage | 13.2-13.5V/26.4-27V | ||
DC load routes | Single/dual optional (confirm when order) | ||
Each route load maximum current | 10A | ||
Empty load consumption | ≤1% | ||
Charging loop voltage drop | ≤5% | ||
Temperature compensation | Optional feature -5 mv/ºC (single) (confirm when order) | ||
Installation structure | Wall hanging Al case, inside light pole | ||
Size | Maximum size: W180, H220, D80 Installation parameters: see later figures | ||
Working environment | -30℃- +50℃ | ||
weight | Controller: 2Kg Dumper: 1.6Kg | ||
NOTE: 1. Must use dumper from the same package as controller! 2. When ordering, provide wind motor rate power and other its characteristic information. 3. Confirm installation bracket direction when ordering. |
Symbol | Definition | Light | Flash | Off |
Recovery button | 1. After battery low voltage protection, battery voltage does not reach over-discharge recovery point, but already higher than lower limit, press this button to cancel second route low voltage protection state. 2. When slight overload happens, press this button to cancel overload lockdown. | |||
First route overload indicate | First route serious overload, protected | First route slight overload, load still attached | First route current comply with rate value | |
Second route overload indicate | Second route serious overload, protected | second route slight overload, load still attached | Second route current comply with rate value | |
Low voltage indicate | Battery over-discharge, low voltage protection | _ | Battery voltage normal | |
Working indicate Solar charging indicate | Controller working | Solar charging | _ | |
Dump indicate | _ | Battery full Start dumping | Not dumping | |
Wind charging indicate | Wind motor charging voltage is higher than battery voltage, charging battery | Not charging |