CRD-635 -5K 635nm RED DIODE LASER
Company Profile
| Location: | China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | CRD-635 -5K |
|---|
Product Description
3000~5000mW
RED DIODE LASER At 635nm
Diode red laser 635nm is made features of ultra compact, long lifetime, low cost and easy operating, which is widely used in measurement, spectrum analysis, laser lighting show, etc.
635±5 | ||
Output power (mW) | >3000, 3100, 3200, … , 5000 | |
Transverse mode | Near TE00 | |
Operating mode | CW | |
Power stability (rms, over 4 hours) | <5%, <10% | |
Warm-up time (minutes) | <5 | |
M2 factor | <20 | |
Beam divergence, full angle (mrad) | <5.0 | |
Dimensions of beam at the aperture (mm) | ~7.0 × 7.0 | |
Beam height from base plate (mm) | 93.5 | |
Polarization ratio | >50:1 | |
Pointing stability after warm-up (mrad) | <0.05 | |
Operating temperature (℃) | 10~35 | |
Power supply (90-264VAC) | PSU-W-LED | PSU-W-FDA |
TTL / Analog modulation | Optional, 2kHz or higher (on request, up to 30kHz) | |
Expected lifetime (hours) | 10000 | |
Warranty | 1 year | |
Remarks | MRL-635 is a diode laser module, so the beam quality is not as good as the solid-state laser at 671nm. The beam spot is nearly square. | |
