Perforated Metal Sheet

Perforated Metal Mesh
Use:Filter parts,metal filter panel
ISO9001:2000 Factory
Beauty and Easily Used
Mesh type:round,square

Perforated Metal Mesh:

Stainless steel Perforated Metal Sheet

Glavanized Steel Perforated Metal Sheet

Aluminum Perforated Metal Sheet

Brass/Copper/Phosphor Bronze Perforated Metal

Material:

Stainless steel sheet,

Galvanized steel sheet,

Aluminum sheet,

Brass/Copper/Phosphor Bronze and Other Metals.

Perforated Mesh Types:

Round;

Square;

Rectangular;

Decorative.

Special designs according to the specifications upon request.

The most common percentage of open area is between 30% and 50% although more extreme open areas are available depending on the perforation. Some times the percentage open area has to be kept lower for increased strength and flatness of the perforated metal sheet especially when galvanising.

The maximum sheet thickness, which we can perforate up to, is 25mm, the most common thickness rang is 0.3- 10mm.

Perforated Sheets process:

The sheet is fed to the machine by means of a Roller System Mechanism. The die is preloaded on the machine. On feeding the sheet, the upper section of the machine starts stroking. The sheet is perforated as per the die and is advanced by the amount of the perforated pitch set on the machine, with the next stroke of the slide. This cycle of feeding and perforating continues automatically

Measures Standard:

Sheet size:

1 X 2 meters.

0,915 x 2.44 (3 'x 8')

1.22 X 2.44 (4 'x 8')

0,915 x 3.05 (3 'x 10')

1.22 x 3.05m (4 'x 10')

Available in size 26 to 1 / 2 "in Stainless Steel or in carbon steel.

Holes from 0,020 "to 5" in diameter.

Characteristics: The surface is flat, smooth, beautiful, firm and practical.

Major Applications:

Mining,

Chemistry ,

Agriculture,

Architecture,

Air and Oil Filters ,

Screening process for Grain,

Drying ,

Furniture ,

Hammer Mills, Etc.

Contact Supplier