Wireless & Wired Compatible Alarm System: DIY, Wireless & Wired installation, 8 wireless zone + 8 Wired Zone, Easy-to-operate. Once installed and programmed, the control panel provides all of the controls, notifications, indications. Employs wireless secured communication protocol( ADEMCO4+2, CONTACT ID) and provides both audible and visual feedback as it carries out the operator's commands to the control panel.
The ZDAS-258 can be placed in a convenient, easily-accessible location, enabling the control panel to be installed in a location inaccessible to intruders. In case of tampering or sabotage, an alarm sounds is triggered by the control panel. It's an idea wireless security solutions for residential applications like homes, apartments, condos or townhouses, as well as all industrial security and protection system. Compatible with ADEMCO4+2,CONTACT ID.
- Microcomputer chip set adopted as control panel unit.
- Wireless received, high sensitivity, high anit-tamper(PIR with tamper switch)
- 8 Wireless zone + 8 Wired zone Control Panel with build-in keyboard, without help of phone to set protection, Having 24-hour monitoring zone
- Learning/Study code between detector and control panel.
- 5 zone modes: instant zone, delay zone, 24 hours zone, BOUNDARY zone and BY-PASS zone.
- Full English Display Keypads: Provides clear understanding of system status and zone locations(Zone number indicated on control panel.)
- Each zone can be put more sensors -expandable up to 5 each zone.
- Wireless remote control: Four button, fully programmable key with arm button(Lock), disarm button(unlock), panic button and PIR
arm/disarm independently.
* Panic button: Emergent button to activate alarm and dial tel.
- Supports partial arm/disarming of a group of zones within a partition by remote control.
*Note: PIR detector is preset for the second zone which can be disarmed solely.
- Remote phone control: VIP phone module gives the end user ability to control the system conveniently from any touchtone phone or other
communication tools.
* VIP phone module means Cutting the coming phone call or the tel dialog immediately when it detects an accident occured, then dial the
preset tel No.
* Remote phone control means the end user can operate the control panel via phone to disarm/ arm/ start on/off siren and listen to what
happend when received alarm call.
- Can store and change 6 groups of phone number and 1 group alarm center phone number. When the alarm activated,it could repeat dialing the numbers. and automatically and circularly dialing the tel No. when accident happen untill confirmed.
- Can store up to 10 seconds recording duration, and can be recovered. (you can hear the recorded voices by your mobile when you received
the alarm call)
- UPS power or rechargeable battery built-in, both of that are automatically switched.
* UPS power or Rechargeable battery can work for 36 hours in case of no electricity supply.
- System reset to origin
- High security features: Password protection when you are away to operate the system or password reset.
- Anti-cutting telephone line.
- Alarm siren time/ Alarm triggering time/arming times can be programmed to be delayed.
- Compatible with format of communication: CONTACT ID, connected with the Center of Computerized Report / Receiving Station of Alarms
- Available in several optional frequencies in compliance with international standards.