Automatic Stator Coil Winder For Generator Motor Deep Pump Motor

Automatic Stator Coil Winder For Generator Motor Deep Pump Motor

(1) Main Technical parameter:

• Swing diameter: ≤550mm

• Effective length of tooling: ≤400mm

• Wire head: 1pc

• Max stack height: 300mm

• Max stator OD: 210mm

• Max RPM: 500RPM

• Power supply: 220V/50/60Hz 2.2Kw

• Air pressure: 0.4MPa

• Weight: 300Kg

• Dimension: 1360mm(L)*1300mm(W)*1280mm(H)

(2) Application

This machine is specially designed for multiple wire parallel coil winding such as fan motor, air conditioner motor, pump motor and three phase motor.

(3) Machine function and characteristic

This machine is suitable for multi-connected and multi layer winding. It adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect. There are twp alternate spindles to facilitate higer output. 

(4)Information needed for Automatic Stator Coil Winding Machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator drawing
2. Stator winding drawing
3. Winding distribution drawing
4. Other technical requirement
If possible, it will be better if customer can send us samples.

(5) Operator step

1. Power on the machine

2. Thread wire this this motor

3. Set the winding parameter in the CNC

4. Fix the wire to the tooling

5. Press the "start" button, close the safty door

6. Machine will do winding process automatically

7. After finishing the winding, machine will stop

8. take out the wire from the tooling. 

   
   

Stator coil winding machine

Coils wound by this coil winding machine