user login

STATOR WINDING MACHINE FOR MEAT GRINDER MOTOR STATOR VACUUM CLEANER MOTOR STATOR MIXER MOTOR STATOR COMMUTATOR MOTOR

10000.0 USD
Min. Order: 1 Set/Sets
Trade Term: FOB,CIF
Payment Terms: L/C, T/T
Supply Ability: 30 sets
Place of Origin: Zhejiang

Company Profile

Location: Ningbo, Zhejiang, China (Mainland)
Business Type: Manufacturer

Product Detail

Model No.: ND-TS-1A
Means of Transport: Ocean
Wire range: 0.15-1.3mm
Stator O.D: 50-150mm
Stack length: 20-60mm
Pole: 2 poles
Main spindle speed: 0-450RPM
Voltage: 415V, 50/60Hz
Frequency converter: Mitsubishi
PLC: Mitsubishi
Cylinder and air source part: Airtec
Tension control unit: Mitsubishi or Wanner (at your option)
Production Capacity: 30 sets
Packing: Wooden case which is suitable for sea transport
Delivery Date: 35 days
Show

Product Description

This type of automatic stator winding machine is suitable for two-poles stator winding,such as mixer motor,grinder motor,vacuum cleaner motor etc.The stator coil winding mahcine can wind two stators at the same time. The stator winder is self-locked, quick and convenient. Winding parmater can be set and saved through the touch screen.

Function and characteristic:

1. Manually fitting mould,and straining and releasing the mould with hand control lever.

2. Automatically winding

3. Quickly replace the tooling gripper;

4. Travel,tilt angle could be adjusted;

5. The automatic stator winidng machine is easy to set parameters,alarm available.

Main technical parameter:

Item

Specification

Wire diameter

0.15-1.3mm

Stator O.D range

50-150mm

Stack length

20-60mm

Pole no.

2 poles

Turn number

0-9999

Spindle speed

0-450 rpm

Motor power

4.5KW

Air supply pressure

5-7 Kg/cm2

Voltage

Three phase AC380V50/60Hz

Weight

1200Kg

Dimension

1050(L)X2300(W)X1750(H)mm























Main electrical configuration:
1. Mitsubishi PLC

2. EV4300C GOT

3. Mitsubishi frequency converter

4. Airtec cylinder and air source part

5. Mitsubishi tension control unit or Wanner (at your option)


FAQ:


1. What is the operation procedure of this machine?

A.:Fix the winding tools on stator core,then put stator core on the loading base,press START button,safety door will close,loading base will move inside to the winding position, machine will automatic winding and cut wire,at this time,operator could fix the winding tools on another two stator cores;after finishing winding,loading base will move outside,sfatety door opened,then take out the completed stator,and put another two stator cores on the loading base,one cycle is completed.


2.What is the most common malfunction of this machine?

A.: Sometimes,the machine will stop on one certain step,and not continue to running,in this case,there will be error information displayed on the touch screen,usually,the reason is that the sensor of next step is not on the right position,so machine can not continue to next step, just check the sensor position,and adjust it to correct position,then machine will running properly.When adjusting sensor position,please change to Manual mode, and take care of your hands,because once the sensor is adjusted well,machine will have action for one step.


The stator coil winding machine image dispaly


1.Winding tools 
Automatic Stator Winding Machine


2.Finished stator
Automatic Stator Winding Machine


3.The stator winding Machine construction

Post Buying Request