High precision Armature commutator finish turning Machine with servo system for sale
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB,CIF |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 20 sets |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | ND-WGK-2XB |
|---|---|
| Means of Transport: | Ocean, Air |
| Power voltage: | 240V ±10% 50HZ |
| Main engine power: | 0.75KW |
| Condition: | new |
| armature OD: | 71-148mm |
| Shaft length: | 290-490mm |
| shaft diameter: | 3- l6mm |
| Concentratd degree: | <0.005mm |
| Weight each cutting: | 0.02-0.2mm |
| Dimension: | 950mm*650mm*950mm |
| Weight: | 400Kgs |
| Production Capacity: | 20 sets |
| Packing: | Wooden case which is suitable for sea transport |
| Delivery Date: | 35 days |
Product Description
The DC motor armature finish turning machine is use for armature commutator turning and it can turn and brush the rotor simultaneously.
(1) Introduction and features
Manual load/unload of armature into the turning and brushing stations.
Armature commutator turning and brushing the rotor at the same time
Servo motor drive controls armature rotation.
Robust, vibration-free base and tooling mounting surfaces.
Complete control of belt speed for correct cutting surface speed.
Supporting Clockwise or counterclockwise rotation of armature during cutting.
High precision
Easy access for maintenance.
Low cost
Easy to operate
(2) Technical data:
| 1. Voltage | 240V+/- 10% |
| 2. Frequency | 50Hz |
| 3. Motor power | 750W(AOB71222, Three phase 240 V, connection) |
| 4. Frequency converting power | 750W(2pole,single phase 240v) |
| 5. Control | PLC System |
| 6. Belt press time | 0.1s |
| 7. Cutting time | programmable |
| 8. Cutting speed | pneumatic adjustable |
| 9. Speed frequency range | 0-60Hz |
| 10. Air pressure | 0.5-0.7Mpa |
| 11. Armature shaft diameter range | f3-f16mm (according to customers' requirement) |
| 12. Armature diameter range | 71~148mm |
| 13. Shaft length range | 290~490mm |
| 14. Cutter linear speed | 50m-1000m/Min |
| 15. Weight each cutting | 0.02-0.2mm |
| 16. Commutator Surface roughness | 0.25micron |
| 17. Rotor Surface roughness | 0.4micron |
| 18. Concentricity | ≤0.005mm |
| 19. Max cutting length | 100mm |
| 20. Machine dimension | 950mm×650mm×950mm |
| 21. Weight | 400Kgs |
(3) Application
The armature finish turning machine is used for DC electric motor armature commutator surface finishing.
(4) Picture show
1. The armature commutator turning process
2. Turning and brushing the rotor at the same time
3. Armature show after finish turning and brushing
