Power tool motor armature coil wire making machine
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB,CFR,CIF,FCA,EXW |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 40 sets |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Model No.: | ND-LAW-2 |
|---|---|
| Means of Transport: | Ocean, Air, Land |
| Wire diameter range: | 0.16~0.55 mm |
| Armature diameter: | 20~60 mm |
| Stack length: | 10~70 mm |
| Shaft diameter: | 3~15 mm |
| Commutator diameter: | 8~40 mm |
| Winding speed: | 0~2500 rpm |
| Shaft length: | less than 250mm |
| Armature Slot: | even slot |
| Production Efficiency: | 22S/PC |
| Power source: | Three phase AC380V 50/60Hz |
| Production Capacity: | 40 sets |
| Packing: | Wooden case which is suitable for sea transportation |
| Delivery Date: | 35 days |
Product Description
Power tool motor armature coil wire making machine
LAW-2 series automatic AC servo armature winding machine adopts international advanced technology that use AC servo for winding and indexing. Also, this series of armature coil winding machine uses colorful LCD which is easy for users to change the parameter, and improve the efficiency largely. The coil winder equipment is suitable for small wire diamter winding. The rotor coil winding machine is a good choice for motor manufacturer.
Techinical parameter:
Item | Specification |
Wire diameter | 0.08~0.30mm (Mechanical type) |
0.16~0.55mm (Hysteresis) | |
Winding slots | Odd/even number |
Commutator diameter | 8~40mm |
Armature diameter | 20~60mm |
Armature stack length | 10~60mm |
Winding motor speed | 0~3000 rpm |
Control system | Mitsubishi PLC control |
Air supply pressure | 5~7 Kg/cm2 |
Voltage | AC220V 50/60Hz |
Weight | 500Kg |
Dimension | 1800(length)X800(width)X1500(height)mm |
Information needed for Armature Winding Machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Rotor lamination drawing
2. Rotor assemble drawing
3. Rotor stack drawing
4. Rotor winding diagram drawing: with rotor wire diameter and turn number
5. Commutator drawing
6. Required productivity
7. Other technical requirement
If possible, it will be better if customer can send us samples.
Power tool motor armature coil wire making machine
