Industrial thermal motor overload protector for Temperature Control Switch

BR-A2D. BW series thermal protector is an automatic temperature recovery device. It is installed in series with the motor coil. Therefore, the thermal protector will respond to the temperature change. The heat caused by temperature raise will transmit to bimetallic element. Once the preset temperature is reached, the bimetallic element will react and make contactor cut off. Then the circuit will be cut off. Once the motor temperature decreases to the rated recovery temperature, bimetallic element will recover to the initial station. Then the contactor will close and the circuit will reconnect. When the temperature of motor winding decreases to the rated temperature value of reposition, bimetal element will return to its initial state, the moving contact will be closed and the circuit will be on.

Temperature specification

Open temperature: 70~150±5℃, one gear per 5℃

Reset temperature: it is 2/3 of standard opening temperature or specified by customers. The tolerance is 15℃.

Contact capacity

They are applicable for more than 5000 cycles under following condition.

Storage

Keep the package material and the part itself from snow, rain and pressure. Air humidity should be less than 90%

Industrial motor thermal overload  protector