True density tester QL-120T

Suitable for: Vulcanized rubber, Non-foam plastic, Carbon true density, True density of rock or coal, Pitch coke true density, Abrasive materials true density, Pigment density, Solid and half-solid asphalt density, Cement powder, Refractory materials, Ceramic, Natural stone, Water-coal-slurry density, Carbon materials true density by using boiling method, Soil true density, Ion resin wet true density, Powder true density research lab.

Principle: According to the standards of GB/T533-A, GB/T1033.1, GB/T6155, GB/T23561, YB/T5300, JB/T7984.3, GB/T 1713, GB/T8929, GB/T1713, GB/T208, GB/T5071, QB/T1010, GB/T9966, GB/T18856, GB/T24203, GB/T8330, SL-237, and by adopting the immersed volume displacement method of Archimedean principle, and cooperated with pycnometer, it can show the measuring result directly!

1. For ceramic materials, such as feldspar, quartz and ceramic products, distilled water can be used as liquid medium.

2. When testing the materials which have chemical function with water, such as cement, kerosene or xylene and other organic liquid can be used as testing medium.

3. For inorganic powder, organic liquid also can be chosen.

4. The bubbles need to be removed when powder immersed in the liquid totally, then the excluded volume can be confirmed.

5. Under immersed method, choosing the liquid which can not dissolve but can moisture the sample surface is important.

Model: QL-120T

Weighing Range: 0.001g-120g

Density precision: 0.0001 g/cm3

Measuring time: About 60 seconds

Setting: Settings of water temperature and solution compensation

Interface: RS-232

Density balance, Pycnometer, Spoon, Burette. Weighing pan, windshield, Density Kit of Liquid.

Contact Supplier