Temperature Humidity Chamber

Temperature Humidity Chamber

SPEC:

Model TH-80
(A-F) TH-150
(A-F) TH-225
(A-F) TH-408
(A-F) TH-800
(A-F) TH-1000

Internal size W*H*D(cm) 40*50*40 50*60*50 60*75*50 60*85*80

100*100*80 100*100*100
Outside measurement W*H*D(cm) 120*165*115 130*170*125 140*185*

130 165*195*155 185*200*175 190*210*185
Temperature range
Low temperature:(A: +25degree; B: 0degree; C: -20degree; D:-

40degree; E: -60degree; F: -70degree)/high temperature:100degree

(150degree)
 
Humidity scope 20%-98% R.H.(10%-98%R.H); (5%-98%R.H Specially

selects the condition) 
Warm humidity analysis precision/ Distributed precision 0.1degree;

0.1%R.H./Positive and negative 2.0degree; Positive and negative3.0%R.H.
 
Warm humidity control precision Positive and negative0.5degree; Positive and negative2.5%R.H.
Elevation of temperature/temperature decrease time Elevation of

temperature approximately 4.0 degree/minutes; Temperaturedecrease

approximately 1.0degree/minutes
In exterior material quality Inside and outside a box of material

quality is the SUS304#stainless steel plate system
 
Heat preservation material quality Thermostable high density chloro-

formic acetic anhydridefroth insulator material
Cooling system single stage compressor (-20 degree); Double

sectioncompressor (-40 degree to -70 degree)
Safekeeping of security installment The non- melt silk switch, the

compressor over-load protection,the cold intermediary high and low

pressure protection, the ultrahumidity ultra temperature protection,

the fuse, the breakdown warningsystem,lacks the water to report to

the police the protection
Fitting In the operation hole sets at the glass door (to select

andpurchase), the recorder (selects and purchases), observes the

Windows,50mm measures , In the PL box the lamp, the partition board,

does thegauze, the foot wheel, horizontal foot rest 
Power AC220V , 50/60Hz  , AC380V , 50/60Hz 
Weight (approximately) 150KG 180KG 2

Certificate of these machines:

China official 3rd party calibration report

CE certiification

For the package:

1. PP film first

2. Vacuum package

3. PP film again

4. 10mm thickness PU foam to avoid collision

5. stronged plywood case

6. Standard ASLI CASE MARK

Our Main Products:

1) temperature humidity chamber

2) temperature fast change chamber (ESS chamber)

3) thermal shock chamber

4) temperture humidity combined salt spray chamber

5) temperture humidity combined vibration chamber

6) pressure accelerated aging chamber (PCT&HAST chamber)

7) high temperature aging chamber

8) sand and dust tester

9) rain/water spray chamber

10) salt spray chamber

11) UV climate resistant chamber

12) high temperature chamber/muffle furnace

13) vacuum oven

14) high frequency vibration tester

15) mechanical shock and impact tester

16) acceleration mechanical shock tester