Salt Fog Chamber for precision components

Salt Fog Chamber for precision components
Details :

SH -type artificial saturated salt spray test sample in order to test their ability to salt water , mainly for the surface of the metal , electroplating , anodizing , etc. . Salt spray chamber is one of the commonly used equipment "three ." Wuhan is still testing experience Equipment Co., the largest of a standard product .

Specifications:

Test chamber size : 600 * 400 * 450mm (SH-60)

Cabinet structure using materials:

1.Test chamber housing the customer needs , using imported impact resistance , high temperature reached 80 celsius degree for PVC , PVC board, or high impact strength corrosion resistant fiberglass ( easy to clean , shock resistance, touch , smooth ) , no leakage phenomenon . Five special instructions with PVC panels

2.Saturated barrels of imported stainless steel SUS 316L/1.2MM high pressure barrel , holding the best, and no rusting .

3.Laboratory closures stamping resistant transparent acrylic panels, thickness 8-10mm, both durable and easy to observe trials transparent phenomenon .

NS.JIS.ASTM specifications , you can set the thermostat control .

Salt spray test : NSS

1.test chamber temperature:35 celsius degree about 1 celsius degree

2.saturated barrel temperature : 47 celsius degree about 1 celsius degree

3.Temperature uniformity : about about 2 celsius degree

4.Temperature fluctuation : about about 0.5 celsius degree

Corrosion test : ACSS

1.saturated barrel : 63 celsius degree about 1 celsius degree

2.Laboratory : 50 celsius degree about 1 celsius degree

3.Temperature uniformity : about about 2 celsius degree

4.Temperature fluctuation : about about 0.5 celsius degree

5.The air supply system : air pressure 1kg/cm2 of two-stage adjustment .

Spray:

1.nozzles : the use of the special nature of blown glass , use the time up to 4500 hours , adjusted by adjusting the size of the spray spire spray volume and spray angle.

2.Adopt Bo Nute principle draw brine and then spray, atomization evenly, no obstruction, crystallization , to ensure the continuous testing standards.

3spray volume : spray tower set at a reasonable lab location , so that uniform off the fog , you can debug 1-2ml/80cm2/HR ( the average amount per 16 hours ) .

4Spray: periodic or continuous spray.

Heating means:

ASLI companies to use direct heating, heating speed, reduce the standby time , less power consumption , temperature accuracy .

Salt spray test safety devices :

1.safety overload protection : Safety overload warning , automatic power off the device .

2.overtemperature protection : over-temperature , automatically cut off the power supply unit .

3.Time saver : when test time arrives, automatically end the test.

Control the composition of the system:

1.Saturated air barrel temperature controller 0 ~ 99.9 celsius degree, digital display with PID automatic calculation, control error about about 0.5 celsius degree.

2.Laboratory temperature controller 0 ~ 99.9 celsius degree, digital display with PID automatic calculation function , the control error about about 0.5 celsius degree.

3.While the plot is 0-9999H.

4.Digital display time controller 0.1S-99.99H

Certificate of these machines:

China official 3rd party calibration report

CE certiification

For the package:

1. PP film first

2. Vacuum package

3. PP film again

4. 10mm thickness PU foam to avoid collision

5. stronged plywood case

6. Standard ASLI CASE MARK

Our Main Products:

1) temperature humidity chamber

2) temperature fast change chamber (ESS chamber)

3) thermal shock chamber

4) temperture humidity combined salt spray chamber

5) temperture humidity combined vibration chamber

6) pressure accelerated aging chamber (PCT&HAST chamber)

7) high temperature aging chamber

8) sand and dust tester

9) rain/water spray chamber

10) salt spray chamber

11) UV climate resistant chamber

12) high temperature chamber/muffle furnace

13) vacuum oven

14) high frequency vibration tester

15) mechanical shock and impact tester

16) acceleration mechanical shock tester

Pls feel free to contact us for detail technical parameters.

Ms. Joanna

Ai Si Li (CHINA) TEST EQUIPMENT CO.,LTD

Company Add : Building C,JinHui Industrial Park,LiXin Town,East City District 523125,DongGuan City,China

Cell : 0086-769-23164266

Fax : 0086-769-22851784