Hammer Crusher
| Place of Origin: | Shanghai |
|---|
Company Profile
| Location: | Shanghai, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Vibrating Screen, Jaw Crushers, Jaw Crusher, Mobile Crusher, Jaw Crusher Series |
Product Detail
| Application: | Ore |
|---|---|
| Type: | Crusher |
Product Description
Hammer Crusher is the priority equipment for the small type sand stone production line with thecharacteristics of low investment and fast return. It features the simple structure, large reduction ratio, and high-efficiency,with both dry and wet process are available. Hammer Crusher is used for grinding the medium-hard and low-abrasive materials with their pressure resistance strength blow 100Mpa ,and humidity lower than 18%. And these materials include the coal ,salt,plaster,tile,limestone and so on .
Working Principle:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers.
1)The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are crushed to small sizes by the high-speed hammer ,with the process of pressing, impacting , cuting and grinding.
2)There is a screening plate under the rotor, which make sure the materials with size smaller than the screen mesh will be screened out and others will be left to be further hammered and ground until they fufill the standard size.
3)The size of the final products can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.
1)The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are crushed to small sizes by the high-speed hammer ,with the process of pressing, impacting , cuting and grinding.
2)There is a screening plate under the rotor, which make sure the materials with size smaller than the screen mesh will be screened out and others will be left to be further hammered and ground until they fufill the standard size.
3)The size of the final products can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.
Structure Features:
1.The hammer adopts the new crafts and features the anti-wearing and anti-compact
2.The particle size can be adjusted according to the requirements of the customers.
3.With a compact structure ,it has solved some problems such as the dust pollution in the crushing workshop and dust leaking.
4. With a grace figure and compact structure ,small amount of the wearing parts ,and convenient maintenance ,it is an ideal replaceble products.
2.The particle size can be adjusted according to the requirements of the customers.
3.With a compact structure ,it has solved some problems such as the dust pollution in the crushing workshop and dust leaking.
4. With a grace figure and compact structure ,small amount of the wearing parts ,and convenient maintenance ,it is an ideal replaceble products.
