DC solenoids

Specifications

parameters\type	MFZ1-2.5YC	MFB1-2.5YC	MFZ1-4YC	MFB1-4YC	MFB1-5.5YC	MFZ1-5.5YC	MFZ1-7YC	MFB1-7YC
Rated voltage(V)	12 24 110 220	110 220	12 24 110 220	110 220	110 220	12 24 110 220	12 24 110	110 220
Rated Force(N)	≥25	≥25	≥40	≥40	≥55	≥55	≥70	≥70
Rated Stroke(mm)	3	3	6	6	4	4	7	7
Full Stroke(mm)	≥6.2	≥6.2	≥12	≥12	≥8.5	≥8.5	≥10.5	≥10.5
Consumption Power(W)	≤26	≤26	≤40	≤40	≤40	≤40	≤40	≤40
Endurable oil pressure(MPa)	6.3	6.3	6.3	6.3	6.3	6.3	6.3	6.3
Operation frequency(T/h)	7200	7200	7200	7200	7200	7200	3600	3600

External Shape and Installing Dimension

Note:
Electromagnet adopts plug bases meeting the requirements of the ISO4000 standard. The user can choose at his needs between the two specifications, including plug base with indicator light and plug base without indicator light. The voltage specification of the plug base with indicator light should conform to the voltage specification of the electromagnet itself.
The manual jogger of the electromagnet should be controlled by hand only in the debugging or critical situation. However, when the backing pressure of the system is pretty high and difficult to adjust, the user should use the cross head driver to slowly push the manual jogger instead of using impact force so as to avoid destroying the manual jogger and the surface of the direction hole which will cause the electromagnet to leak the oil and unable to reset.
When the electromagnet is used Bi-direction, it should be insured that the two electromagnets cannot be electrified at the same time so as to avoid the malfunction of the electromagnet.
Overcurrent protection system should be used in the connection part between electric control system and electromagnet so as avoid burning the electromagnet and electronic control units under improper condition.

Contact Supplier