ISO + European Standard Cylinder
HC95 Series(φ32-φ125)
Features:
.According to the following standards: VDMA24562, DIN 24335, ISO15552,(ISO6431);
.The important sealing elements are imported from Japan;
.Type PP cushion sealing elements are applied which enjoy the following advantages:
a.In possession of the functions of non-return valve with quick start-up speed of cylinder;
b.In possession of the functions of self-centering with excellent cushion effect and stead cylinder operation which has avoided the up-down movements of piston rod at the end of traveled distance caused by eccentricity;\
Specification | | | | | | |
CylinderDiameter(mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 |
Working Medium | Filtered compressed air |
Acting Mode | Double-acting |
Ensured Pressure Ressistance | 1.5MPa(15kgf/cm²) |
Maximum Working-pressure | 1.0MPa(10kgf/cm²) |
Minimum Working-pressure | 0.1MPa(1kgf/cm²) |
Ambient and medium temperature | 5-60℃ |
Cushion | Air cushion |
Woring Speed | 50-500mm/s |
Lubrication | Not Requuired |
Joint Tube Caliber | G1/8 | G1/4 | G3/8 | G1/2 |
Travel distance error(mm) | Travel distance | 0-250 | 251-800 |
Error | 0-1 | 0-1.5 |
* In case iubrication is required. Please use turbine No.1 oil ISOVG32.
Order Example:
1.For order of diaΦ63mm, stroke 125mm. single piston rod, with magnet, basic type cylinder, Correct type:HC95B-63*125\
2.For order of diaΦ63mm, stroke 125mm. single piston rod, with magnet, basic type cylinder, Correct type:HC95DB-63*125\
3.For order of diaΦ80mm, stroke 100mm. double piston rod, with magnet, basic type cylinder, Correct type:HC95DWB-80*100
4.For order of diaΦ32mm, stroke 80mm. single piston rod, Front flange mounting type, Correct type:HC95F-32*80
5.For order of diaΦ50mm, stroke 100mm. single piston with magnet, double ear seat mounting type cylinder, Correct type:HC95DD-50*100
Diameter | Flange | D | A | B | UF | TF | H | W |
Φ32 | F32 | Φ7 | 50 | 32 | 79 | 64 | 10 | 16 |
Φ40 | F40 | Φ9 | 55 | 36 | 90 | 72 | 10 | 20 |
Φ50 | F50 | Φ9 | 70 | 45 | 110 | 90 | 12 | 25 |
Φ63 | F63 | Φ9 | 80 | 50 | 120 | 100 | 12 | 25 |
Φ80 | F80 | Φ12 | 100 | 63 | 153 | 126 | 16 | 30 |
Φ100 | F100 | Φ14 | 120 | 75 | 178 | 150 | 16 | 35 |
Φ125 | F125 | Φ16 | 140 | 90 | 220 | 180 | 20 | 45 |
Remark:
1.Front flange and rear flange are the same
2.Flange of HMB series cylinder and flange of HC95 series cylinder are the same.
HC95L Axial Foot Seat(mm) | | | | | | | |
Diameter | Axial foot seat | AH | E1 | TR | SA | AO | ΦAB | AT |
Φ32 | HC95-L32 | 32 | 48 | 32 | 24 | 10 | Φ7 | 4 |
Φ40 | HC95-L40 | 36 | 55 | 36 | 28 | 11 | Φ9 | 4 |
Φ50 | HC95-L50 | 45 | 68 | 45 | 32 | 12 | Φ9 | 5 |
Φ63 | HC95-L63 | 50 | 80 | 50 | 32 | 12 | Φ9 | 5 |
Φ80 | HC95-L80 | 63 | 100 | 63 | 41 | 14 | Φ12 | 6 |
Φ100 | HC95-L100 | 71 | 120 | 75 | 41 | 16 | Φ14 | 6 |
Φ125 | HC95-L125 | 90 | 140 | 90 | 45 | 20 | Φ16 | 8 |
Remark:The middle Axie pin of HMB Series cyliner and the middle axie pin of HC95 series cylinder are the same.